HOW DO YOU INSTALL THE DAYTIME DRIVING LIGHTS OR THE FOG LAMPS ON THE FORD FUSION 2007

SOURCE: how to install OEM 2007 camry fog light?

Follow the link below to find with picture and step by step instruction to mount the foglights. It's lot easy than connecting the wires.
http://meandmycamry.freeservers.com/photo.html

For me I managed to install the foglights but not sure how to connect to the power and bring the wire to the dashboard. My car didn't come with wiring connections for foglights. Would appreciate if someone can help me with that ( possibly instructions with pictures), Thanks.

SOURCE: Fog Lamp Bulb Replacement, 05 Tucson

remove headlamp assembly and you can get it from the top pretty easy

SOURCE: Fog Lamps on 2003 Pontiac Sunfire Not Working

check ground at fog lamps.

Marvin

• 85242 Answers
• Posted on May 14, 2009

SOURCE: daytime running lights and blinkers do not work

the lights are controlled by a module, it is the DRL module, replace it. also try this
On the inside of the car next to the light switch there is your dome light button. GM made it to where you could turn off the daytime running lights by pushing it three times in and out. Turn the vehicle on then do this. Your daytime running lights should work after this.

SOURCE: HOW TO INSTALL 2007 CAMRY FOG LIGHTS

make sure you have holes in bumper you can run wires through firewall and tie into fuse block+pos wire goes to at least a 20amp fuse and other side toswitch +pos wire from lights goes to other side of switch -neg wire goes to suitible body ground in engine compartment fender bolts use eyelet conector or you can attach to neg term of battery.royedwardtat