20 Most Recent 2007 Ford Fusion I4 SEL Sedan Questions & Answers

0helpful
3answers

Radio LCD Lights Don't work - 2007 Ford Fusion

I was told by the Ford dealership that I had to replace the entire radio. This is also happening with my Ford Fusion (2007). I opted not to replace w/ the same radio because what if it happens again?? My lights came back after some time, but who knows how long they will last.
6/29/2019 1:02:19 AM • 2007 Ford Fusion... • Answered on Jun 29, 2019
0helpful
1answer

2007 ford fusion PCM location

I know this is an old post but may help others

The PCM in my 2006 Ford Fusion is below the battery against the firewall.

You will need to remove the bracket holding the battery, the battery, and the tray that the battery rests on.

The PCM is held to the firewall with 4 bolts and I believe they are 10mm. Remove plugs and unbolt.

5_22_2019_12_13_07_pm.jpeg5_22_2019_12_13_08_pm.jpeg5_22_2019_12_13_09_pm.jpeg
5/22/2019 12:13:44 PM • 2007 Ford Fusion... • Answered on May 22, 2019
0helpful
1answer

2007 ford fusion bumper removal with oem body kit

This website www.reliable-store.com has the largest collection of repair, service, parts manuals of any vehicle on earth. Best website I came across for manuals.. Very helpful website
3/7/2018 7:37:29 PM • 2007 Ford Fusion... • Answered on Mar 07, 2018
0helpful
1answer

HOW DO I UNLOCK A 2007 FORD FUSION WITH A DEAD BATTERY

Have you tried opening the boot with the key & climbing through? Some models will open via the key in the boot lock.. If this doesn't work I'd call a locksmith to come & open the door legally by getting in with a special tool, without the need to break the window, hope this helps....
1/25/2018 8:20:22 AM • 2007 Ford Fusion... • Answered on Jan 25, 2018
0answers
0helpful
1answer

Remove front passenger air bag

You must disconnect the battery negative (-) cable and wait at least 10 minutes before attempting to unbolt the airbag.
5/1/2017 9:56:59 PM • 2007 Ford Fusion... • Answered on May 01, 2017
0helpful
1answer

I have a 2007 ford fusion 4 cylinder. Hen I start

You need to have a ford dealer run a power balance test and also see if the coil is getting a signal to fire, this would be wiring issue or a PCM problem.
4/5/2017 10:41:27 PM • 2007 Ford Fusion... • Answered on Apr 05, 2017
0helpful
1answer

Is the road between Orange and Parkes closed due to flooding?

Are you kidding? This website is on the WORLD WIDE WEB! Anyone, anywhere in the world can see your question. My question to you is: "How in the WORLD am I to know where you are in the world to even begin to answer that question?!?!?!" FYI - I am in the USA in Central Virginia - bet you aren't!
9/7/2016 2:59:32 PM • 2007 Ford Fusion... • Answered on Sep 07, 2016
0helpful
1answer

2007 Fusion 2.3L with FNR5 transmission I'm looking PCA circuit wiring diagram. Does anyone have it? Your help is very much appreciated. Thanks

Do the diagnostics on the fault code first. You have the Ford emissions system Troubleshooting repair manual correct? If not try eBay for that and a wiring diagram booklet called the Ford Vacuum and Electrical Troubleshooting guide.
6/22/2016 8:33:08 PM • 2007 Ford Fusion... • Answered on Jun 22, 2016
0helpful
2answers

Driver window wont go up or down 2010 ford fusion

Do the other windows work ok? There might be something wrong with window motor, itself? With most vehicles, the driver door window is rolled up and down much more than the others.
4/30/2016 10:06:34 PM • 2007 Ford Fusion... • Answered on Apr 30, 2016
0helpful
1answer

My car is making a loud whistling noise every morning when it warms up please if you can, can you tell me which belt it is that I can replace?

If it is a belt.... there is only one serpentine belt. Does it go away after it warms up? In the 90's Ford had a problem with the EGR valves that would "hoot" until it warmed up.
4/13/2016 6:18:52 PM • 2007 Ford Fusion... • Answered on Apr 13, 2016
0helpful
1answer

Please resend the answer as it was deleted when I was trying to retrieve it.

there is no answer,you need to delete your other question,you dont need to take dash out,to take cable out
7/15/2015 11:02:11 PM • 2007 Ford Fusion... • Answered on Jul 15, 2015
Not finding what you are looking for?
2007 Ford Fusion I4 SEL Sedan Logo

429 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2006 Ford Fusion
2006 Ford Fusion

750 Questions

2009 Ford Fusion
2009 Ford Fusion

135 Questions

2011 Ford Fusion
2011 Ford Fusion

91 Questions

2005 Ford Fusion
2005 Ford Fusion

53 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Fusion Ford

  • Fusion Ford

Most Popular Question

please resend answer as deleted when

  • Cars & Trucks
Loading...