You would have to take it apart and check the following in this order with a multimeter.
Element continuity.
Switch operation.
Thermostat.
Wiring plug to internal junction terminals
..
Question edited for clarity, remove text speak and toss in a load of CAPS.
According to the advertising, it is supposed to pump and generate loads of steam continuously.
Steam ironing Recommendations: To prime the steam circuit, either before using the iron for the first time, or if you have not used the steam function for a few minutes, press the steam control button several times in a row, holding the iron away from your clothes. This will enable any cold water to be removed from the steam circuit. • To obtain steam, press the steam output button under the iron handle. The steam will stop when you release the button. • After approximately one minute, and regularly while it is being used, your steam generator's electric pump injects water into the boiler. It makes a noise but this is quite normal.
I would try a liquid descaler like CLR and try to get liquid up into the head of the iron as well. My thought is that something is stuck with scale buildup.
The Tefal website has Customer Support and also says they are repairable.
https://www.tefal.com/instructions-for-use/csp/1830005694
More here
https://www.google.com/search?q=Tefal+Actis+Steam+Generator+Iron.+It+is+continuously+pumping
..
Videos show repair.
babylisspro.com.auhttps://babylisspro.com.au > warranty
For all retail purchases to make a claim, simply return the defective product back to the place of purchase where it will be tested & replaced. The information ...
Missing: 3000 ' Show results with: 3000
Heating elements are vulnerable, they have a filament. Heat being generated should freely disperse. Another reason for having the water tank connected, is the possible buildup of scale. Like with coffee makers, the temperature would not reach a high enough level after some time and the iron then requires descaling.
I'm sorry to hear that you're having trouble with your Miele rotary iron B865. There could be a few different reasons why the slot won't open up and the iron won't rotate.
First, make sure that you've followed the instructions in the user manual for operating the rotary iron. Check that the iron is securely plugged in and turned on, and that you're using the correct temperature setting for the type of fabric you're ironing.
If the iron still won't rotate, there may be a problem with the motor or the mechanical components of the iron. You could try unplugging the iron and checking for any obstructions or debris that might be preventing the iron from rotating. If you're comfortable doing so, you could also try opening up the iron and inspecting the mechanical components for any signs of damage or wear.
If you're unable to identify the issue on your own, I would recommend contacting Miele customer service or a professional repair technician for further assistance. They will be able to help you troubleshoot the problem and determine the best course of action to get your rotary iron working properly again.
Hello again Julia
Despite my searching, I find that you are the only person to have this issue. I am guessing that you has a split in the steam tank, a bad connection to the steam tube, or a split tube. The only way would be to strip it down or take it in for repair. You could try contacting Tefal and see if you can get a warranty repair on it. Even if it is out of date, you can still ask.
https://www.google.com/search?q=tefal+actis+steam+generator+leaking+steam
..
Use filtered water in the iron if your tap water is exceptionally hard or includes a lot of minerals. This can lessen the likelihood of corrosion and mineral development.
@tamihomen. It is better to make your own post rather than tagging a post from 13 years ago. The area where you wrote is for asking the OP for further information before committing to an answer.
Link to ProSteam and parts diagrams
https://www.google.com/search?q=prosteam+pss-2001+parts+list
..
Thanks for that Tim, very useful indeed. Siri did well, but there were two typos which I fixed 'price', to 'prise' and 'stripey' to 'stripy'.
These videos may have been helpful for Sensixx and may have been the ones you watched.
Thanks again, much appreciated.
..
https://www.youtube.com/watch?v=9kTFaHDxkG4