Electronics - Others - Page 6 - Recent Questions, Troubleshooting & Support

It's generally not recommended to run a KIPOR 3000TI Inverter without the Kipor 66284 DC receptacle. The DC receptacle is an important safety feature that helps to protect the inverter and any connected equipment from damage. If it has been removed, it's possible that the inverter may not function properly or may be at risk of damage. If the DC receptacle has been removed and you are experiencing issues with the inverter, it's best to contact a professional repair service or the manufacturer for further assistance. They will be able to diagnose the problem and recommend the appropriate repairs. It's also a good idea to stop using the inverter until the issue has been resolved, as continuing to use it without the DC receptacle may cause further damage or pose a safety risk.

If your Power Star W7 has a dead display and no output, it's possible that there is an issue with the power supply or the display itself. Here are a few steps you can try to troubleshoot the issue:

1. Check the power cord and outlet to ensure that the W7 is properly plugged in and receiving power.
2. Check the power supply for any visible signs of damage or malfunction.
3. Check the display for any visible signs of damage or malfunction, such as cracks or loose connections.
4. Try resetting the W7 by unplugging it and waiting a few minutes before plugging it back in.
5. Check the owner's manual for any troubleshooting tips or information on common issues.

If these steps do not resolve the issue, it's best to contact a professional repair service or the manufacturer for further assistance. They will be able to diagnose the problem and recommend the appropriate repairs. It's also a good idea to stop using the W7 until the issue has been resolved, as continuing to use it may cause further damage.

If input A is not working on your hybrid b1200 when in stereo mode and input B is working as if the mode is in parallel, it's possible that there is an issue with the wiring or connections for input A. Here are a few steps you can try to troubleshoot the issue:

1. Check the wiring and connections for input A to ensure that they are secure and properly connected.
2. Check the b1200's fuse and circuit breaker to ensure that they are functioning properly.
3. Try resetting the b1200 by unplugging it and waiting a few minutes before plugging it back in.
4. Check the owner's manual for any troubleshooting tips or information on common issues.

If these steps do not resolve the issue, it's best to contact a professional repair service or the manufacturer for further assistance. They will be able to diagnose the problem and recommend the appropriate repairs. It's also a good idea to stop using the b1200 until the issue has been resolved, as continuing to use it may cause further damage.

Question edited for clarity. Question moved from Computers category. Guessing the claims for the inverter are wildly out, or the StarSat receiver doesn't like the AC phasing. Ask them both direct. It is likely they will blame each, so it should be fun. Voltronic https://www.google.com/search?q=voltronic+solar+inverter StarSat. https://www.google.com/search?q=starsat+receiver ..

Have you tried replacing the disposable-lens filter ? The manual is available at: http://brauntherms.com/downloads/IRT4020_4520_MNLA_U.0035_OM_25JAN11.pdf

did u check fuse in plug? just change it no need to check it, if still no good open it up and see if there's a wire off battery, if still no joy search for one on flea-bay, i can't see it so i hope u know wot to look 4 loool

good day. I have a pump that i want to start / stop with a pressure switch. How will i connect this ?

Thank you

need more info did you leave gas in the tank without stabil if so carburator is got gas sludge in it

it does not have USB input

It doesn't exist. Take it to an electronics engineer for component testing or just buy a new one. https://www.google.com/search?q=BPS-8203+wiring+diagram ..

Most likely the battery volts are displaying correctly. There is a voltage drop on the battery due to its internal resistance, when you connect a supply the voltage drop is less. If you were to put a new battery on it it might reduce the voltage drop, as long as the battery is designed for the current load it's taking. If it's working I wouldn't worry, but if the voltage continues to drop with use I'd be thinking it needs a new battery. (Assuming the battery is charging correctly)

Besides running chkdsk, here are additional suggestions: https://www.diskpart.com/articles/usb-drive-read-only-7201.html

Better backup your phone data first as this will wipe such. (You will lose Google account data on the phone, for example.) 1. Turn off your cell phone. 2. Hold the Sym button together the Power button. In the Android recovery menu 3. select Wipe data/factory reset > using the volume down or up button 4. Select Enter. 5. Select "Yes - delete all user data" 6. Press Power key to confirm. When Data wipe complete is displayed, 7. select reboot system 8. Press Power key to confirm to reboot.

Unfortunately a badly written question. What is a 'memory exit USB'? ' do I to have '? Word missing? All USBs work. Some dives that you attach them to have 'maximum capacity' restrictions.

Either the batteries are used up an cannot be charged any longer or the charger is broken.

Yes, the Google Home is basically the same idea as Amazon Echo. but there will definitely be things that each can do that the other can't. For example, most likely you won't be able to access each other's services... so on Google Home you most likely won't be able to order items from the amazon store or use Amazon Music... and likewise on the Echo won't be able to use Google Play Music or, more importantly, Google Search (which is far superior to Echo's search). Support for 3rd party services and Smart Home devices - The Echo has been out for about 2 years now which has given it a head start with developers to build support for these services and Smart Home devices. Currently Google Home only supports, nest, SmartThings, Philips Hue, and IFTTT for Smart Home devices... but I definitely wouldn't write off Google Home just because it doesn't support as many Smart Home devices as Echo right now, because I honestly believe Google Home will catch up very fast, especially given amount of 3rd party developer support Google already has. A couple big things that Google has created to help developers build upon is two open platforms called Google Assistant and Actions on Google... with these two platforms developers will be able to do a lot of cool, fun, and useful things with Google Home, which will not only work on Google Home devices but they'll also work on Google Pixel phones... so you can also tell Google Assistant on your Pixel phone to turn on outside lights. One area with connected devices I think Google has the leg up on the Echo is Google Home's support for Google Cast... with this you'll be able to Cast audio from your smartphone to a Google Home device and, even better, you'll also be able to Cast both audio and video from Google Home to devices that support Google Cast, like Chromecast... so you can tell Google Home to, "play CSI on the Living Room TV" and CSI will start playing on Netflix through Chromecast on your living room TV. Another area I think Google Home will be much better at is Searches. I currently have the Echo (which I think is great and use all the time), but I get frustrate with it because far too often it can't answer my questions. When the Echo can't answer my question I'll pull out my android phone and ask Google Now the same question and most of the time I get an answer to my question from Google. My wife gets frustrated with the Echo too, because she like to ask Alexa for recipes, and Alexa has never once been able to give her a recipe. Since Google Home uses the same search service I have little doubt that Google Home's searches will be far superior to the Echo searches. The last area I think Google Home will be better is, unlike the Echo currently, the Google Home devices will know about each other and work together... so when you have two Home devices within listening range of each other and you say "Ok Google" they'll work together to determine which devices is closest to you and will respond from that device only... and supposedly it'll also try to determine if you're talking to your android phone or a Home device when you say "Ok Google". Also you can create groups with Google Home devices, and Cast enabled devices, to play audio at the same time across devices in the group. The big question I have is how well will Google Home hear your voice compared to the Amazon Echo. Because the Echo does a very very good job hearing and understanding your words... although this is not the same thing as giving good search results. I'm hoping Google Home is as good at understanding your words from across the room.

Any mobile phone shop or electrical retailer will probably have one or use a usb lead to your computer.

It wont work. Electricity does not work like that. you can't double the power just by doubling the watts or amps. there is a lot and lots of other things involved.
I would rewire you camper so that half is run be one generator and the other half by the other generator... SO lights and fridge on one and plugs and heater on the other maybe...

I may miss the point here. If the question is how to clear the error, page 57, item 4.7 Error Messages, of the KEB instruction manual may be of use. https://www.manualslib.com/manual/1293218/Keb-Combivert-F5.html?page=55#manual Here is information about the error code: KEB Error "E. OP" ERROR overpotential (voltage) 1 Voltage in the DC-link cicuit is too high. Occurs if the DC-link circuit voltage exceeds the permisible value. Causes: - poor controller adjustment (overshooting) - input voltage too high - interference voltages at the input - deceleration ramp to short - braking resistor defective or too small Given the very technical nature of the KEB, I lean toward referring to the manufacturer's support. There are quite a number of KEB YouTube videos and a number of supporting documentations available on the web. Perhaps the following will be of use if not an entire misdirection: https://www.kebamerica.com/elevator-support/ https://www.kebamerica.com/products/f5-inverter/

Try to burn a similar disk from different package or with some other utility i.e nero or something similar, ir possible use different machine