Hello i have konica minolta bizhub this is show error c-3c50 what is this thanks
Whot is the error code and whot model of bizhub u have???
1. Turn OFF the Main Power Switch.
2. Turn Main Power Switch ON again while pressing the Utility/Counter key more than 10 seconds after.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and the it has been reset.
5. Turn off the Main Power Switch and turn it on again more than 10 seconds after, and make sure that the machine properly starts.
Your not giving enough information. But i would make sure that the interface cable between the optics and the print engine are intact. Its the fat cable with the high density pins on the right side of the machine near the back. (external) Make sure this is reseated, otherwise you will be tearing into control boards.
508 views
Usually answered in minutes!
can not find this error on the manual. are u sure of the error code ?
×