What does code F1E1 mean for a WEG745H0FH0 - Whirlpool Kitchen Ranges

Barbara, F1 E1 error is your washer doesn't think the drain pump is working properly.bad CCU or pump.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

have E1 and F1 error code fleshing and wate Sears PartsDirect

http://forum.appliancepartspros.com/washer-repair/443358-f1-e1-error-fault-code.html

Appliance Repair Forums

Error code F1E1 null ShopYourWay

Central Control Unit CCU Maytag MHW6000XW Washer

Whirlpool RBD305PDS Electric Double Oven Repair ... - Fixya

www.fixya.com > Forum > Ovens > Whirlpool
Whirlpool Oven has an F1E1 error code. Whirlpool Ovens ' Answered on Nov 04 ...Whirlpool error code am71 ui44 eewet107 · Whirlpool Ovens ' Posted on Nov ...

Check the harness from the ccu .If all in tacked replaced the ccu.

Hello,

The E1-F1 error code means that the oven control board has detected a error within the board itself and the control needs to be replaced. The error code can be cleared by pushing the cancel/off button and if it returns shortly thereafter the control defeintly has a defect and should be replaced.
The part number for the control board is W10157245 itcould purchase it at your local appliance parts store or online at;
searspartsdirect.com
repairclinic.com
apdepot.com
partselect.com
apwagner.com

GENE-->-->

F1 - E1
EEPROM checksum error
1.
Disconnect power for at least 30 seconds.
2. Re-apply power and observe for
at least one minute.
3. If code re-appears, replace control board (also
called ERC or clock).

Note: Applies to all F1-E...
codes except F1-E3.

Read more: http://www.appliancepartspros.com/repairtips/repairtips_appliance+fault+codes.aspx#Jenn
Air Range / Stove / Oven Fault Codes#ixzz19GMNtS3r

http://www.appliancepartspros.com

Hi


Thanks for using FixYa. F1-E1 error indicates that the control board has gone bad and should be replaced to resolve the issue. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

F1-E1 Defective ERC Replace ERC

ERC= electronic oven control


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

On whirlpool/kitchenaid/kenmore oven it means a bad control board. Call for service.

oven repair in orange county, ca
appliance repair orange county, ca

Hi there,
This it the proper solution for your problem:
1. Disconnect power for at least 30 seconds.
2. Re-apply power and observe for at least one minute.
3. If code re-appears, replace control board (also called ERC or clock).

Hi Rooster,
This it the proper solution for your problem:
1. Disconnect power for at least 30 seconds.
2. Re-apply power and observe for at least one minute.
3. If code re-appears, replace control board (also called ERC or clock).

I would need the complete model number to give you a price and part number for the ERC. Just let me know if I can help you more.
Mike Anderson (Owner)
Anderson Appliance
(865)945-3808