C03ff bizhub 211 konica minolta - Konica Minolta Office Equipment & Supplies

Wrong model settings. this happens, when we clear all from service mode.

PRESS.....
UTILITY
STOP00STOP01
ADJUST
MODEL SETTING
CHOOSE CORRECT MODEL HERE.

MODEL SETTING ERROR
IN SERVICE MODE-ADJUST-MODEL SETTING
Now choose right model (Like if 211 means 21 PPM so choose 21PPM)

KONICA MINOLTA BIZHUB 211 FUSER UNIT 230V / 4034r70100 (surplustoner.com)


Here is the image of the fuser

OPC Drum for Konica Minolta bizhub 210/162/211/163/182/215/164/

For the C3451 Code replace the Fuser
For the C03FF there machine thinks it one model type the circuit board are set to a different model Change setting in Service mode under adjust to proper model.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Error Name:-
machine trouble service call c03ff

Model Setting - go to service mode press ( utility stop 00 stop 01 and go to adjust select model press off and on

how can i reset the password for my konica minolta bizhub 211 to remove the maintainance call 2 display?

model setting error :)
never change this setting.
if it changed,the Technical Rep.call (C03FF) will appear.
,default setting depend on the marketing area setting.
ex: 20ppm,18ppm,16ppm....

C03FF, is the improper or unmatched model setting code. go to "service mode" In service mode please select "ADJUST"
in "ADJUST" please select "Model Setting" in "Model Setting" select the cpm, (Copy speed) of your machine, for example if you have bizhub 210, then select "21" from the list. if you have bizhub 163 then select "16" from the list and press "yes" button. code will remove.