20 Most Recent AEG Lavamat 88840 Front Load Washer - Page 2 Questions & Answers

check inlet valves and pressure switch also check that door lock is working corectly

Hi,

C9 Indicates Motor Fault. It seems that the Carbon Brushes have Worn out.

Replace it and more likely it would Fix the Problem.Once you replace that, you need to put the machine into Service Mode to Reset the Error.

Steps for Reset the Error Code

1. Press and Hold the Prewash and Soaking Buttons Together.
2. Whilst Holding them, Turn the Dial from Off one Click Anti Clockwise

Note - If problem persists, Check the motor plug for broken wires and check the state of the carbon brushes.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

check power okay @ outlet/ unplug remove top cover inspect ..any loose wires electrical cord input?.....

Please check the link below for tips to replace.http://www.espares.co.uk/advice/washing-machines/a/7/1397/how-to-replace-the-door-seal-on-a-washing-mac.html