Question about Whirlpool Washing Machines
...6300sw1 won't aggitate and gives ol code won't aggitate, skips to spin and flashes ol at end It is overload error. "oL" (Over Load) Is the washer overloaded? The washer has attempted to fill • and ...
Question about GE Washing Machines
...it washes, but 17 minutes showing, jumps to 2 minutes, then shuts off with 'OL' error code. OL = Overloaded. Is the Washer overloaded? If OL (overloaded) appears in display, the load too large. If ...
...thourght it only happened on spin but it goes to end as soon as the motor turns Could be a bad overload protector in the motor. Some machines have a circuit where the machine rapid advances to ...
...limit" trip. This signifies problems with the drive motor, thermal protector, motor controller. Overloading the machine will cause high amps and trip the unit. Instantaneous current trip occurs
...My tenant says the machine was a poor quality model. I told the tenant it could be due to an overload. They are upset, as there are only two of them. So cannot be overload. ...
...board damaged? OVER CURRENT ERROR ? Display shows 8E. IPM fault signal (this is caused by the overload of the MICOM INTO during motor action). IPM: Integrated power module. The IPM controls the ...
LG washing machine Model WD 1433RD Error Code is "LE" ie Overload On Motor. How can I fix this by meself? I had the same problem. I thought it was the motor it turned out I had a nickle wedged in the ...
LG wm6042h washing machine. LE code for motor overload. Just replaced bearings and seal, put back together and now have an LE code (motor overload). Drum spins great! But maybe when replacing the ...
Question about AEG Washing Machines
machine was overloaded and now the spin cycle will not work Won't spin now hum check the belt if applicable, the door switch just in case co incidence plays out here, also may have a bad clutch or ...
what I found: 11. OVER CURRENT ERROR - Display shows 8E . - IPM fault signal (that is caused by the overload of MICOM INT0 during motor action) is sensed. IPM : Integrated power module. , IPM controls
133 questions posted
Usually answered in minutes!
181 Questions
148 Questions
55 Questions
58 Questions
49 Questions