Noisy spin on hotpoint aquarius WF530 6kg washing machine. Suspect bearing how do I replace them.

Question 1

0helpful

1answer

Washing machine sounds like a jet plane, when spinning

I would suspect that the main drum bearings have failed.
From the front of the washer, spin the drum by hand, and if it feels rough or is noisy, then the bearings have failed.
There should be little or no noise when you spin the drum.

Jan 31, 2011 • Hotpoint Aquarius WF000 Front Load Washer

0helpful

1answer

Very noisy when spinning - suspect bearing problem. Would appreciate advice on bearing replacement. Model no. WF 240

Hi,
When my washer did that, I found that the shocks that hold the tub were bad...

Check out this tip I wrote about that...

Washer Problems Washer noise when spinning
http://www.fixya.com/support/r3663122-washer_problems_washer_noise_when

heatman101

May 30, 2010 • Hotpoint Aquarius WF220 Front Load Washer

2helpful

1answer

I have a Hotpoint WF540 washing machine. When it goes into fast spin, the spin cycle is quite noisy....on slow spin it is fine......could this be a bearing problem? If so how easy are they to replace?

Sounds like drum bearings most cases you need to buy half drum with bearings fitted if your very good at diy no problem if not call engineer.1st check concrete weights are not loose top and bottom.............you can buy parts @ espares.co.uk this will give you idea of cost which maybe quite high.

Apr 21, 2010 • Hotpoint Aquarius WF000 Front Load Washer

0helpful

1answer

Washer makes thumping noise when spinning and belt jumps off

I suspect that the main drum bearings have failed.
Remove the belt, and from the front spin drum by hand, if it feels rough or is rumbling or noisy, then drum bearings have failed.
Can be expensive!!!!

Feb 21, 2010 • Hotpoint Aquarius WF000 Front Load Washer

0helpful

1answer

Noisy when spinning

bearing gone cheaper to buy a new one

Jan 23, 2010 • Hotpoint Aquarius WF000 Front Load Washer

1helpful

1answer

Aquarius 1100 wm63 very noisy spinning

Remove rear cover of washer.
Remove drive belt.
From inside the drum, spin the drum by hand, if it is noisy or feels rough, then main drum bearings have failed.
If no noise, then possibly motor bearings noisy.
Hope this helps Thankyou.

Nov 27, 2009 • Hotpoint Washing Machines

1helpful

1answer

Hotpoint WF220P has become very noisy during spin, especially at high revs. Can it be worn brushes or motor, or bearings? Otherwise all is OK.

Remove drive belt, and spin drum by hand, if it feels rough or noisy, then the main drum bearings are worn.
If no noise from drum, could be a motor prob.
Please rate ,my solution.
Thanks.

Nov 02, 2009 • Hotpoint Aquarius WF220 Front Load Washer

0helpful

1answer

Hotpoint Aquarious 1200 IE When spinning the drum ocsillates violently and is very noisy.

Remove drive belt, and spin drum by hand, if noisy or rough, then bearings have failed, if no noise, then could be suspensioon leg problem.
Please rate my solution.
Tghanks.

Sep 15, 2009 • Hotpoint Aquarius WMA42 Front Load Washer

1helpful

1answer

Bearings very noisy on the drum

aquarius w f 541 1400 spin drum bearing noisy

Nov 14, 2008 • Hotpoint Aquarius WF000 Front Load Washer

3helpful

1answer

Hotpoint Aquarius WMA54 very noisy during spin

Hi, if your H/P is noisy on the spin cycle, just open the door and turn the drum a few times. If you feel some play, or kind of loud huming noise, then it is the bearings, very, very common on H/P WMA's.

Nov 13, 2008 • Hotpoint WMA54 Front Load Washer

Question 2

Barry Coates

Hotpoint Master 3,463 Answers
Posted on May 27, 2009

Barry Coates

Hotpoint Master

Joined: Nov 17, 2008

Answers

3463

Questions

4

Helped

1407045

Points

12766

If you spin the drum by hand, and it is niosy and rumbling then the main drum bearings have failed.
If under 5 years old, then you should be able to get it repaired under Hotpoint 5 year guarantee, You just pay for labour and call out, cheapest option, it is not really a D.I.Y job, as it is quite involved, and entails a lot of work.
Please rate my advice.
Thanks.

erika_9092 Oct 21, 2013

Sadly my machine is over 10yrs old. Has been working so well until now with the bearings worn out.

×

Related Topics:

Trustworthy Expert Solutions

Noisy spin on hotpoint aquarius WF530 6kg washing machine. Suspect bearing how do I replace them.

1 Answer

Barry Coates

Add Your Answer

Attachments: Added items

Related Questions:

Washing machine sounds like a jet plane, when spinning

Very noisy when spinning - suspect bearing problem. Would appreciate advice on bearing replacement. Model no. WF 240

I have a Hotpoint WF540 washing machine. When it goes into fast spin, the spin cycle is quite noisy....on slow spin it is fine......could this be a bearing problem? If so how easy are they to replace?

Washer makes thumping noise when spinning and belt jumps off

Noisy when spinning

Aquarius 1100 wm63 very noisy spinning

Hotpoint WF220P has become very noisy during spin, especially at high revs. Can it be worn brushes or motor, or bearings? Otherwise all is OK.

Hotpoint Aquarious 1200 IE When spinning the drum ocsillates violently and is very noisy.

Bearings very noisy on the drum

Hotpoint Aquarius WMA54 very noisy during spin

Not finding what you are looking for?

Aquarius WF000 Front Load Washer

Washing machine sounds like a jet plane, when spinning

Ask a Question

Top Hotpoint Washing Machines Experts

vince

Cindy Wells

Paul Carew

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

Trustworthy Expert Solutions

Noisy spin on hotpoint aquarius WF530 6kg washing machine. Suspect bearing how do I replace them.

1 Answer

Barry Coates

Add Your Answer

Attachments: Added items

Related Questions:

Washing machine sounds like a jet plane, when spinning

Very noisy when spinning - suspect bearing problem. Would appreciate advice on bearing replacement. Model no. WF 240

I have a Hotpoint WF540 washing machine. When it goes into fast spin, the spin cycle is quite noisy....on slow spin it is fine......could this be a bearing problem? If so how easy are they to replace?

Washer makes thumping noise when spinning and belt jumps off

Noisy when spinning

Aquarius 1100 wm63 very noisy spinning

Hotpoint WF220P has become very noisy during spin, especially at high revs. Can it be worn brushes or motor, or bearings? Otherwise all is OK.

Hotpoint Aquarious 1200 IE When spinning the drum ocsillates violently and is very noisy.

Bearings very noisy on the drum

Hotpoint Aquarius WMA54 very noisy during spin

Not finding what you are looking for?

Aquarius WF000 Front Load Washer

Washing machine sounds like a jet plane, when spinning

Related Topics

Ask a Question

Popular Questions

Washing machine has 1 minute left on cycle stuck door wont open programme not finished

Washing machine door wont open on hotpoint

Code F-02 on hotpoint WT960

Error code f 05

My hotpoint aquarius wd440 has flashing lights

Top Hotpoint Washing Machines Experts

vince

Cindy Wells

Paul Carew

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides