20 Most Recent Konica Minolta PagePro 1350W Laser Printer - Page 6 Questions & Answers

streaks are caused by toner on paper path rollers, clean these and it should stop. Also dont overfill the casettes with toneer ( common with refurbished)

Please rate my help++++Thanks for using FIXYA

Toner streaks usually denotes a bad drum.
Sorry.

If you are satisfied with my answer, be sure to click on the "Thumbs-Up". If you have further questions, please feel free to ask them. Thanks for using our service!

Here's the link...

http://download.cnet.com/KONICA-MINOLTA-PagePro-1350W/3000-2116_4-155429.html

though Vista is not specified in the list of OS's it should work with that too.

Dear Friend, If the line is always in the printing poorly, it's because of damage to the image drum. In this printer the drum and toner cartridge are in one unit, so replacing the cartridge will fix the problem.
Click here
Hope this Will Make you Better Thanks For Using FixYa

This printers have a USB connection, choose the first "virtual printer port for USB" this will be good enough to download your driver.

I looked at the manufacturer's web-site:
http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productname=1350W

and you are correct -- there are drivers for 2000/XP, and for 95/98, but nothing for Vista nor Windows 7.

Find an old computer running Windows 2000 or XP, and connect the printer to it, and "share" the printer across your home-network.

If the line is always in the same spot, it's because of damage to the image drum. In this printer the drum and toner cartridge are in one unit, so replacing the cartridge will fix the problem. New OEM cartridges are around $100, and after-market compatible ones are about $60. Those prices are from a few vendors I found by searching for replacement drums on Google.

Hope this helps. Thanks for using Fixya!

you can download a copy of driver for your printer from here

Click here to Download

This will help. Thanks please keep updated. please do rate the solution positively .Thank you for using Fixya

Regards
Manish

Found it here maybe you must select the right one..
http://download6.konicaminolta.eu/konmin/public/&&BEU&EN&&&&&&0&&&0&&0&&0

Sometimes paper jams (and iron on jams) can cause the paper (or iron on) to get stuck in areas that are not visible to you, usually on the sides of where the paper would go. I don't know the specifics of your particular printer, but I would take a look at the guides on the side of the paper path and there are usually several screws that you can remove or loosen so that you can verify that the paper path is clear. Hope this helps and good luck!

Check the paper to see if you have too much in the paper tray or if any of the edges are frayed. I've also heard that it may be related to a issue on the roller that picks up the paper - I have that problem myself. I was told to check the roller and if it's dirty clean the roller with some rubbing alcohol.

Sounds like you may still have a piece of paper in the printer. Open the toner door - take out the cartridge, reseat it and then close the door. If the error light stays on you probably have something stuck in the machine. You might need to power it off (unplug it) and then see if there's anything on the rollers.

Do you have printer settings on a shared network. Did you allow print sharing? You should enable those. Is it set as default printer? Did you set up a at home network?

download printer driver from here

http://onyxftp.mykonicaminolta.com/DownloadFile/Download.ashx?fileid=10957&productid=980

copy and paste the link in you browser

please go printer utilty option on your pc then you can print a testpage

http://help.bt.konicaminolta.ca

the attached page is the driver download page, was refered to it by MAC web site for your 1350 printer.

http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/min12xxw