1995 kawasaki ZZR 400 "float settings" Questions

Ad

Question about kawasaki ZZR 400 Motorcycles

2 Answers

...settings for the carbs on a ZZR400N. I am having trouble getting the bike to run/idle properly. float height 13mm +/- 2mmpilot 35main jet size 100+102idle screw 2.25 turns from fully inneedle type ...

Ad

Question about kawasaki ZZR 400 Motorcycles

1 Answer

No power and high fuel consumption The bike does not seem to go faster than 120km/h in 6th gear. It picks up nicely through all the gears but as soon as I reach the higher gears (5 and 6) the power ...

Ad

Question about kawasaki ZZR 400 Motorcycles

1 Answer

Float setting for BS34ss carb I need the procedure and measurment for float in my 1980 Suzuki GS450 with BS34ss carbs I have a set my float to 22.0 +- 1.0 for a Mikuni carb. To set floats, drain the ...

Question about kawasaki ZZR 400 Motorcycles

1 Answer

Need to set floats on an xj 700 How do i set the floats on a 1985 Yamaha xj 700N Maxim? with the float bowl off and holding the carb level, adjust the float where it is level and the jet is up enough ...

...nothing do you know what it would be and what would fix the problem Overflow on carb bowl? Metal float-set too high-pinhole in float. Plastic float-same answers for metal float. Foam float-set too ...

Question about kawasaki ZZR 400 Motorcycles

1 Answer

what is the float height setting for a 1984 harley davidson ironhead sportster with stock carburetor With the float bowl off and the float assembled in the carb, hold the carb on it's side with the ...

2003 yamaha yfz450 float setting,how to set float on a dirt bike. i would like to know inches i took carb off to clean so i need to set the float.there is gas running out the drain tub The float hight

Question about kawasaki ZZR 400 Motorcycles

1 Answer

carb. on 883 sporster Adjusted float on carbon. Now gas stopped leaking but doesn't idle without choke. Back fires How did you set the float level. Sounds like you did not get the float adjustment set

...for about a month now when u turn on fuel it leaks out if the over flow tube what could cause this Floats not set right. Float needle worn. Dirt keeping float needle open. Clean out carb, adjust ...

...settings for carb jet screws and float setting Engine is flooding and running rough. Husband needs to know the float setting and jet screw or screws setting for choke the float doesnt have a ...

Not finding what you are looking for?
1995 kawasaki ZZR 400 Logo

28 questions posted

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...