Check out the diagram but if that's not helpful click the link and you'll find what you're looking for! https://www.google.com/search?q=01+ford+4.0+sohc+vaccum+line+routing&rlz=1CDGOYI_enUS827US827&oq=01+ford+4.0+sohc+vaccum+line+routing+&aqs=chrome..69i57.21729j0j7&hl=en-US&sourceid=chrome-mobile&ie=UTF-8#imgrc=_
SOURCE: 2001 ford explorer sport, door keypad reset
How to find the Security Keyless Keypad Code on the 1995-2001 Ford
Explorer or Mountaineer and how to use the Keypad functions. The factory
code is also printed on a label which is installed on the Remote
Anti-theft Personality (RAP) Module. This is the module that controls
the keyless entry system. It is
located in the left rear quarter behind the removable panel (see photo).
You will need to turn the two thumb screws counter clockwise and take
the plastic panel off to be able to see the unit. A flashlight may be
helpful in seeing the code. You are looking for the module and the 5
digit code on it like the one shown below.
Now that you’ve got the code I’ll tell you how to use the Keyless entry
and set-up your own code.Make sure when pressing the controls on the keyless entry keypad you press the
middle of the buttons to ensure good contact with the controls.
Check this for Programing the Keypad.
Hope this help (remember rated this comment).
SOURCE: need a vacuum diagram 1998 ford explorer v8 2wd
heres a vacuum diagram for a 1998 ford explorer with the v-8 engine, hope this helps,
SOURCE: I need a vacuum diagram
Check this...
Fig.: Vacuum hose routing for 1995-99 Explorer/Mountaineer models with the 4.0L engine (click for zoom)
I hope helps, remember to rate and comment this answer.
723 views
Usually answered in minutes!
×