2004 Dodge Ram 2500 "hemi engine trouble" Questions

Ad

...engine. Leave ignition switch ON for a minimum of 10 seconds. This will allow PCM to learn electrical parameters. NOTEThe DRB III Scan Tool may also be used to learn electrical parameters. Go to the ...

Ad

...hemi 5.7 liter trouble codes 1404 and 405 and check engine light on The check engine light is on to tell you that the ECU has detected a fault. The faults are stored as codes. The codes both have to ...

Ad

hemi I need engine liter size? My database won't say, hemi, but only engine size. There are two ways the fuel pump is controlled, one way is with a separate fuel pump relay. The other way is the logic

...HEMI/MDS engine.If I shut the engine down when hot and then restart within a short time the idle goes up and down by about 100 RPM.It settles itself out after about 5 or 6 repetitions.The air filter ...

...Hemi 5.7L v8? THIS ENGINE HAS ELECTRONIC THROTTLE CONTROL..THERE ARE 2 THROTTLE POSITION SENSORS LOCATED IN THE THROTTLE BODY,COMPLETE ASSEMBLY MUST BE REPLACED IF DEFECTIVE..IT ALSO HAS SENSORS IN ...

engine went dead it dosent crank now just backfires through intake truck is 05 Dodge Ram 1500 5.7l hemi took valve cover off to see if a spring had broke possible you blew a chain. pull # 1 plug bring

...engine ligh checked for trouble codes using my superchips flashpaq tuner using it's diagnostic feature and did not detect any trouble codes, what could this light mean? i cant find any diagnostic ...

Question about Dodge Ram 2500

1 Answer

...hemi also check engine light comes on Take it to one of the bigger autoparts stores, they will usually scan for free, and determine what trouble code is actually present to verify problem area. The ...

...engine light is on. Gas sensor re circulation sensor "A" Circuit High. Replace the EGR and the solenoid (come with it) and this will fix the problem. Diagram for 2.7L & 3.5 L *** Please note if ...

...hemi quit running while driving. has 60 psi fuel pressure, new battery, computer says po340 crank and cam sync state out of sync. can this cause no start? yes. the engine computer does not know when ...

Not finding what you are looking for?
Cars & Trucks Logo

1,028 questions posted

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...