Locks & Locksmithing - Page 8 - Recent Questions, Troubleshooting & Support

If you look underneath the numbers on the wheel you'll see a green desk keep turning it until you see a space facing you once that space space is facing you write down the numbers then start turning them counterclockwise one number at a time and usually by the second or third time you'll get the right combination so say it was 042 to it would end up being 264 would be your combination

If this is a battery operated lock then the backlight doesn't stay on (otherwise it will wear the batteries out). To make the keys light up when you want to enter your code you have to push the lock button on the keypad first. If the keypad light has never come on then open the door and manually lock the interior lock then press the keypad lock button then the above instructions will work. This is the solution I got from Kwikset customer support and it worked for me. Hope this helps you.

Hi! I am trying to open this lock with my code, but it won’t open. It keeps blinking green. I didn’t change the code and I know that the red light was coming on for a few days. I think it’s the battery but any tips?

What is the condition of the battery? Locks can use a lot of power

I dont think this model has any indication of low battery, usually battery life is 2 years but depends on usage! If the battery goes flat you have an emergency key to gain access.

Well

Typically, the batteries for this system last up to nine months to a year. The brand that best suits this Gunvault MicroVault XL MVB1000 Gun Safe is the Duracell battery. If your unit is stored in very hot or very cold conditions, the battery life may be shorter than expected. To get a replacement key you will need to download and print the form on the internet requesting a new key. Mail this in with a cheque or a money order.

The company is still in business. Ask for a manual and reset the code. https://www.google.com/search?q=old+noble+safe ..

The safe comes with 2 extra keys you can use if the battery fails. Also, if you cannot find the keys, there is an included battery backup box which you can connect to the Biometric Lock and used to open the safe. To know more details about this product you may visit here : BARSKA Large Biometric Safe Review

ANY LOCKSMITH CAN PROBABLY OPEN IT FOR YOU

Heat it up. Put hot hands both sides for 10 minutes or slip it close to your skin or in your pocket for 5 minutes. Prepare for the shock! Or you can spray it with de-icer fluid.

contact the makers

The question leaves us wondering if you know the combination? Try 000 to see if it is still set to factory combination.

Your first step would be to contact the lock manufacturer, most will send you a replacement key with confirmation of your model and or Serial #.

You would have to have to get replacement keys from the dealership then or there are key cutting for vehicles so you can get another key then and locksmiths too.

Contact Omega directly to inquire.

GoogleRona Electronic Deadbolt Lock Instructions:Default Master Code:123Resetting Master PIN:Remove batteries and put them back. You will hear a long beep and a short beep.Press and hold the 0 button until you hear 3 long beeps and the LED flashes red for 3 seconds. You are now in program mode.Within 10 seconds, key in a new master PIN (up to 12 digits) and press the UNLOCK button.Key in the master PIN again and press the UNLOCK button. The LED will flash green for 1 second and the resetting is complete.Adding a PIN:Key in master PIN and press UNLOCK buttonPress and hold 0 button until you hear 2 short beeps and the LED flashes for 3 seconds.Release 0 button and you are in the Add PIN modeWithin 10 seconds, enter a new PIN and press the UNLOCK button. You will hear one beep.Key in the new PIN again and press the UNLOCK button twice. When the LED stops flashing the PIN has been added.make model resetting lockhttps://www.google.com/search?q=resetting+Master+pin+on+rona+Electronic+Deadbolt+lock..

Don't you have a over ride key? look on this link for what I mean. 2006 Competitive safes Cash Box Digital Lock Depository Safe...

Hi, Try setting the lock to the original combination and see if it will move then. Also keep a can of spray lube handy (and a rag) to give it a good squirt and free up any rust inside. Good luck.

no info generic answer either notify manufacturer or locksmith