My flat screen emerson television is in standby mode but the power light is not on what could it be
Hi.
What has most likely happened is that you have a capacitor/capacitors that have failed.
This is a very common occurrence with flat screen tv's and monitors.
This is because the parts that go into the screens aren't always as good of quality as they should be.
Capacitor failure is by far the leading complaint amongst flat screen tv and monitor owners.
I would take the tv to Fry's or BestBuy, have them ive it a good look-over, and get an estimate of costs before having it done.
I say that, because capacitor repairs can sometimes be as much, if not more than the cost of buying a new tv.
It may not, but if you get an estimate, you can then look around and see if any stores have new tv's for around the same price.
If they do, then I would just buy a new one, as then you would have a warranty to back up any repairs.
I hope this helps you out, and good luck!
What is the model of your TV?
In between or unidentified.Values can additionally be http://www.cheatengine.me well as lots of others game promptly made use of in smart devices
Cheat Engine Download APK for Android 2017 Latest v6...
Tweaking games can be quite fun if...
SOURCE: my emerson tv standby light is on the power light flashes twice
I have this problem too with my 32 inch Digital LCD TV.
SOURCE: I have an Emerson TV 32
You will need Power-Inverter board.
I do have them in stock!
Please be free to contact me at [email protected]
SOURCE: I have an Emerson HD digital TV model LC195EMX,
The indication of the standby light shows that the sub power circuit is functioning alright. Now on depressing the switch on power if there is no reaction then the main processor is getting an errror message for no switching. If you are getting any click and shut off then there is a power short/ fault in the HT circuit which requires further probe. You can check the main fuses and for dry soldering joints/ loose connectors in the main PCB, if all this is fine, I suggest you get help but ask your technician to give you an insight if the fault is in the control, main power (SMPS) or the HT. I hope this adivce helps. Good day.
SOURCE: My flatscreen won't turn on it keeps going red to standby
Good day!!!!
Commonly that trouble is cause of faulty capacitors on power supply board...
Power supply looks like this:
Please follow this step on how to fix that problem on your own..
Try to watch this video about capacitors and how to replace it...
I hope this solution will be helpful...
Thanks for using fixya...
12,443 views
Usually answered in minutes!
×