Hoe to I fix my roku box it says it is overheating

To connect a Roku box to an LC320EM2 TV, you'll need to follow these steps:

1. Connect the Roku box to the TV using an HDMI cable. Locate the HDMI port on the back of the TV and plug one end of the cable into the Roku box and the other end into the TV.
2. Power on the Roku box and the TV.
3. Change the input source on the TV to HDMI by pressing the "Input" or "Source" button on the TV remote. Keep pressing the button until you reach the HDMI input that the Roku box is connected to.
4. Follow the on-screen instructions on the TV to complete the Roku box setup process. This will involve connecting the Roku box to your home Wi-Fi network and creating a Roku account.
5. Once the setup is complete, you should be able to use the Roku remote to access various streaming services, such as Netflix, Hulu, and Amazon Prime Video, on your LC320EM2 TV.

If you have any issues during the setup process, refer to the Roku box manual or contact Roku customer support for further assistance.

After using a Roku streaming stick for a month or two, you may receive a Roku Stick Overheating warning message. This means that your stick has been exhausted and reached the maximum level of heat it can withstand.

To fix the overheating issue, simply remove the stick and allow it to cool for 10 to 15 minutes.

If the error persist, you can make use of an HDMI extender or replace the old power cables and adapter with the new one.

I presume you have a box and not a stream stick.Try unplugging ROKU box.Many units have a button you have to push on remote after plugging in ROKU box,this connect Remote to ROKU box.If this doesn't work take out batteries in remote and put back in,this has to be done after you plug in ROKU box.Are batteries weak,try some new ones?

It is a Roku vs TV interpreation of HDMI. IMO it is Roku being too protective. No other box in the house has a problem with any of TVs or cables. New cables did nothing and the cables were the latest and gold plated. Reboot the Roku and it works....for a while until it comes back.

I believe that each Roku must have its own password. You can go to the Roku site and deregister your current box, then re-register it and your second box with new passwords. Or you can press the reset button on your current box and that will flush your old password and return the box to factory settings.

There could be a time-out issue with it. But try uninstalling it' then reinstalling it. My ps3 did that to me, where it said Netflix was not compatible. But I just had to reset the cache, and the permissions to get it going again. Hoe is that Roku box for you? I watch a lot of Netflix, when I'm not at work or busy doing automotive care. I was thinking about getting off those to do my netflix on instead of the ps3. All of my computers at the house are Mac though. Not sure if that would really matter. I could just do Apple TV instead for better and easier connectivity.

If your Roku is working properly, and will not connect to Netflix. Access your Netflix account through the internet on your home computer. Check the size of your instant que and if over 50 entry's, start deleting your que. The Roku can not handle over 50.

Place the Roku box on your TV or entertainment center and plug it into the wall outlet. Connect the box to your TV with the included AV or HDMI cable. Insert the included batteries into the Roku remote.

2 Turn on the Roku and the TV. Press the "Input" or "Source" button on the TV remote until the Roku menu appears. Follow the instructions until the wireless setup screen appears. Use the remote to select your network and input your Wi-Fi network access code, then press "next."

3 Turn on your computer and log in. Start your Internet browser and type "roku.com/link" in the address bar. Press "Enter."

4 Set up a Roku account if your don't already have one. Enter the code that appears on your TV screen to finish the setup process.

Read more: How to Set Up Roku Wireless ' eHow.com http://www.ehow.com/how_7459834_set-up-roku-wireless.html#ixzz1AZ8NBDhQ

I have this problem any suggestions will be GREATLY appreciated. The gage maxes out on the dash. It doesn't leak any fluid.