At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: My Jenson jxp680 amp is stuck on saftey mode can...
There is a shorted output transistor causing that to happen. There could also be a short in the wire from the amp to the speaker and/or a shorted voice coil in the speaker.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
radio stuck in phone mode Cars & Trucks Questions ...
www.fixya.com > Forum > Tags > radio stuck in phone mode
Cars & Trucks radio stuck in phone mode questions and answers. Ask your radio stuck in phone mode car and truck question. Get free help, advice & support for ...
Apr 28, 2009 - CD Player Stuck on Eject Mode & my Truck isn't Even On !! ... It won't accept a CD, but the stereo still works; however, the digital screen shows ...
Bypassing the neutral safety switch won't help with the transmission problem. That switch is only wired into the start circuit.
Scan the computer for trouble codes. Has to be a code if it is in limp-in mode.
With the ipad completely powered off (not sleeping) press and hold the home button, then onnect the USB to the computer. Continue holding until you see "connect to itunes" then release the button. Open up itunes to see recovery mode. Follow the instructions it presents.
YES!! You used the blue wire to turn on factory amp (blue wire to GM pink) you NEED to use the Blue/White wire. That is the amp turn on. The blue wire goes dead when you play a CD or DVD because it's for a power antenna. So, Blue/White ok?
Set your Filter Switch to LPF. Turn the Bass Gain/ level all the way down temporarily. Set your Crossover to below 100HZ. Then Turn on the system with a Bass test sound. Turn up your bass Gain/level until you get distortion. Then turn it back till you just get the distortion out. Then do not warn everyone that you will De-nad them if they touch your settings.
×