My printer shows a code#3527 and states a problem with the printhead..i show nothing wrong what is the error ?

Please follow the below link to the Kodak website for this code:
Printhead carriage jam or all in one printer error code 3515 3525 3527...

Error: "Printhead Failure" (105-3802) - Kodak

support.en.kodak.com/.../error%3A-printhead-failure-(105-3802)

KodakAug 25, 2010 - How do I resolve the error message "Printhead Failure" (error code ...If you are not prompted to calibrate the printhead, turn off the printer, wait ...

Error: "Printhead is missing, not installed correctly, or has ...

support.en.kodak.com/.../error%3A-printhead-is-missing,-not-inst...

KodakAug 25, 2010 - How do I resolve the error message "Printhead is missing, not installed correctly, or has come loose" (error code 105-3513) on my ESP or HERO All-in-OnePrinter? ... If the printhead and ink cartridges are not installed in the printer, install them: ... If the error continues, restart the printer and try to print.

Hello Dave,
The error that you are showing means Error: "Printhead is missing, not installed correctly, or has come loose" (105-3513) Please use the following link to help you trouble-shoot and fix this error:
Error Printhead is missing not installed correctly or has come loose 105...

Hi friends,
I was able to solve this problem (error code 3527 on Kodak hero 9.1) by opening the printer entirely (dis-assembled), Checking the cartridge carriage assembly, i discovered that the belt that drive carriage assembly had a locker that was broken as such, the carriage assembly could not move in the direction as the motor drives the belt on.
I simply inserted the belt in position and drop a little drop of super glue to it, let it dry off.
Assemble my printer, and it was ok and is working.

the only thing i can think off is there is a problem with the head sensor, the heads move back and forth on a rigid belt but the head case also runs along a see through plastic strip, this has lines in it and tells the printer were it is, other thing i can think of is the head cleaner, they can get stuck in them sometimes and cause misalignment and damage the reader. also anything they like to use on printers is a inc use chip that can make faults come up so you have to buy a new printer. this has been in a few articles. business printers don't have this feature. hope this helps

Contated Kodak about the error code 3527 and was advised I needed to purchase another printer and they would give me a 30% discount. Why would I do that when my Kodak printer is only 14 months old! My Dell is 9 years old and works fine! Dell ink cartrides are expensive and can only be ordered online. That is why I switched to Kodak. Do not buy Kodak!

kodak 5250 kod 3527

Print cartridge jam error 3527
I cleared this error by manually moving the head cleaning pad into its stand by position It must of stuck while changing the ink cartridges.

Maybe the printhead is not working properly. call Kodak and they will going to replace tht printhead. Thanks