Hi, I just changed the maintenance free box on my venta airwasher, pressed vapor and humidity buttons to clear the "change" sign, filled the tank, waited 30 seconds before turning on the unit and now it simply blinks on the display...no mist. Can you help? Do I need to send it back? I have tried unplugging it, taking the new box out and re-inserting it, and messing with the level of vapor/humidity requested. Thank you in advance!
This has happened to me. Check the contact points in the base of the machine. Ours had some corrosion on them. I took an emery board and filed the corrosion off to clean the contact points.
you are a genius!
This totally worked for my machine as well! Thanks!
I had the same problem on my machine. Cleaning the two contacts solved the problem. This could be also bad contact between the three contact for the ultrasound device so they need to be checked as well.
×
Try cleaning the contacts if that fails hold down the two must and fan buttons for ten seconds to reset
Same problem here too!
Do you have an owners manual? There might be a reset code. I would look at that first. If it does not have a reset code, then yes you should return it.
Fill Water Tank.
Turn off humidifier and unplug the power cord from A/C outlet. Remove tank from
base. Turn upside down and unscrew filling cap. Fill tank with clean, cool, distilled,
filtered, or tap water. Do not attempt to fill unit through Vapor Nozzle. Water temperature
should NEVER be too hot or too cold. Extreme temperatures can damage the
unit. Tighten filling cap firmly. Return tank to base and let it sit for a few minutes. For
first time use or when replacing the demineralization cartridge filter, please soak the
filter in warm water for several minutes.
3,071 views
Usually answered in minutes!
×