Connecting pvr dstv decoder 3001 - Televison & Video

Question edited for clarity.

It depends on the model of your television and how old it is?

The DSTV Decoder is connected via a HDMI Cable and you select that HDMI socket using the remote button, listed as Source or Input.

https://www.google.com/search?q=Condere+32+inch+connect+DSTV+decoder

..

If you're not getting any sound from your DSTV decoder when connected to your Aim 60 Inch Digital UHD TV via HDMI, there are a few things you can try:

1. Check your TV settings: Make sure that your TV's audio settings are set correctly. Check that the volume is turned up and that the TV speakers are not muted or turned off. Also, make sure that the TV is set to receive audio through the HDMI input.
2. Check your DSTV settings: Make sure that your DSTV decoder is set to output audio through the HDMI connection. You can usually check this in the settings menu on the decoder.
3. Try a different HDMI input: If you have other HDMI inputs on your TV, try connecting the DSTV decoder to a different one to see if the problem persists. This will help to narrow down whether the issue is with the HDMI input on your TV or with the DSTV decoder.
4. Try a different HDMI cable: Even if you think your HDMI cable is fine, it's possible that there is an issue with it that is causing the sound problem. Try a different HDMI cable to see if that resolves the issue.

If none of these steps solve the issue, it's possible that there is a problem with the HDMI input on your TV. In that case, you may need to contact Aim customer support for further assistance or consider bringing the TV to a repair shop.

The search query for this is

make model manual

size, in this case is irrelevant :>) Or of course you could read the manual that came with it.

https://www.google.com/search?q=condere+tv+manual

Channels are set by whatever the input is from, cable, satellite box, IP PVR, Over-Air decoder, etc. Your television just relays what it sees from the Input/Source HDMI cable
..

Power fluctuations
https://www.askmefast.com/MY_DSTV_DSD_3U_DECODER_IS_DISPLAYING_ONLY_ORANGE_STEADY_LIGHT-qna9330642.html

Or it might be dad service, or downloading new software

[Responded] Poor service / Decoder software removed ' DStv ...

www.hellopeter.com > dstv-multichoice > reviews > po...

Mar 14, 2018 - However, the problem escalated now whereby my DSD 3U DSTV decoder suddenly switched off and only display an amber light in the middle ...

Gotv decoder showing a yellow / Orange light constantly

myofflinestash.com > index.php > gotv-decoder-showi...

Solid Red This means that the decoder is in StandBy Mode, this is similar to a computer being put in sleep mode. · Solid Amber This state of the decoder means ...

Quick Guide - DStv

cdn.dstv.com > selfservice > documentation

PDF The moment you connect your DStv HD Decoder, is the moment your TV viewing experience will become ... Solid AMBER = decoder is downloading software.
..

Hi,
check the video .
DStv tutorial Channel htxt africa Review Multichoice DStv Explora PVR
www.electro-medical.blogspot.com
https://www.facebook.com/electromedservices?fref=nf

www.retrevo.com/
Try this site.
Electro help

Is this a newly installed system? If both tv's are responding to the same remote setting (red in case), it means both tv's are set to the same channel. The tv that is connected to the decoder directly (via AV cables, I presume) is supposed to respond to if the remote is set to red. In order for the second tv to respond when the remote is set to blue, you need to tune the second tv until you find the picture of tv2 (the decoder transmits both tv1 and tv2 on the RF/coaxial output and it seems that your remote tv is tuned to tv1 instead of tv2).

• i cant connect my standard decoder to samsung 51inch as ther are only ports compements and hmdi,do i need a pvr decodr?

press the shift button, its stats flashing than press the info button (tv1) works every time