Paper jammed open left cover - Office Equipment & Supplies

Question edited to add model name.

Paper jam

https://www.google.com/search?q=Canon+imageRUNNER+2016+Paper+jam

Open left Cover

Thread: Paper jam, open Left Cover - Canon

Copytechnet https://www.copytechnet.com > ... > Canon Sep 24, 2013 - I am working on a Canon IR2016J. After I serviced the machine the above indication appears: "Paper Jam Open Left Cover". I have checked the ...

iR2016 showing paper jam constatly
Jan 23, 2009
Error Code Front cover open error
Nov 29, 2022
canon ir2020 false jam
Apr 16, 2012
canon ir-2016 showing download standby
Sep 28, 2010
More results from www.copytechnet.com

Power Supply

https://www.google.com/search?q=canon+imagerunner+2016+power+supply
..

hi . be sure there is no paper jam inside the machine . turn off and on if problem persist maybe some of the flag sensors maybe stuck.

Hi

Check all the paper movement from the tray, left or right cover, front cover, if so then remove jammed paper. Otherwise the paper sensor spring guide missing or fell off from its original position. Check carefully where the sensor locate. paper sensors detect all the paper movement in the machine during copying or printing, so locate the place in the machine which the paper usually jammed, see the screen of the machine, it will locate the place where the paper jammed mostly. Sensor not return to it original position that is why ( remove paper jam keeps blinking)

Hi,
The paper jam could be in three places.
First:

Open the cover of fixing section, its above bypass, and check for jamed paper

Second:

Open the transfer cover, these cover has handle and it goes by pulling toward you, and check for jamed paper.

Third:

In hight of first paper cassette, on left sideway of copier, beaneath the bypass are small door, open it and check for paper jams. Be sure that you closed them properly because if they arent closed the check printer cover message will arrise.

Hope that helped

Open the LEFT cover, and remove any jammed paper.
Close the LEFT cover.

There should be a way to unlock one of the sides. Try taking out the toner cartridge and going in that way. If you can see the paper, get a pair of needle nose pliers and SLOWLY see if you can pull the paper out.

Hi

Thanks for using FixYa. Before you can clear the error message, you must locate where in the unit the paper is jammed.

Unplug the machine for safety. Now follow these instructions based on where the paper jam is located.

1. Pull the paper tray out of the machine.
2. Pull out the jammed paper.
3. Reset the machine by opening the Upper Jam Clear Cover and then closing it.

If you cannot remove the jammed paper from the front of the machine, or the error message still appears on the LCD after you have removed the jammed paper, please go to the next step.

4. Remove the Lower Jam Clear Cover from the back of the machine. Pull the jammed paper out of the machine.

5. Put the Lower Jam Clear Cover back on. Make sure the cover is set properly.

6. Open the Upper Jam Clear Cover. Make sure that there is no jammed paper left in the corners of the machine.
Note: If the paper is jammed under the print head, unplug the machine from the power source, then move the print head to take out the paper. 7. Close the Upper Jam Clear Cover.

8. Close the output paper tray cover and slide it forward, then push the paper tray firmly back into the machine. While holding the paper tray in place, pull out the paper support until it clicks and unfold the paper support flap.

Please do rate the solution and revert for further assistance.

Thanks
Rylee

Turn of the printer, and do not close any of the tray or doors before all of the jams are cleared.
1). remove the paper from paper tray, removed the tray and remove the jams.
2).open the front cover and removed the toner cartidge assembly, remove any jams in this area, and behid the toner cartridge asembly.
3).left the flap at the front of the printer adn remove any jams heneath the lap.
4).Open the rear exit and remove any james.
close all covers and reinsert the paper tray and turn on the printer.

E9 code means there is a paper jam.

Clearing Paper Jams
If your scanner stops scanning due to a paper jam in the Automatic
Document Feeder, a warning dialog box opens after a few
moments.
To clear a paper jam:
1. Press the ADF cover release on the top-left of the scanner
body to open the Automatic Document Feeder cover.
2. Remove the jammed paper and close the cover.
To reduce the number of paper jams, smooth and straighten the
paper before scanning and adjust the guides to the paper size.

This should help. Please let me know if it does. Thank you, Binary Bob

PAPER JAMMED INSIDE THE MFC

1. Remove the Jam Clear Cover located in the back of the machine..
Squeeze the plastic tabs located on the right and left side of the cover
and pull the cover off.

2. Remove any paper you can see jammed in the machine. If you cannot
remove the jammed paper from the back of the unit follow the in
structions listed below for reinserting the cover and then continue to Step 4.

3. Re-insert the Jam Clear Cover. The top of the cover has a slotted
opening in the center approximately 1/4 inch wide. Hold the cover by the
plastic tabs located in the front of the cover on the right and left side and insert the cover into the opening until it securely
clicks intoplace (both sides).

4. Open the scanner cover by pulling up on the lower right corner of the
cover until it locks into place.

5. Remove the jammed paper. If the paper is jammed underneath the print
head, unplug the machine from the AC power outlet. Gently move the
printhead to the far right side of the machine (the "home" position) and
then remove the jammed paper.

6. Lift the scanner cover to release the lock and then gently push the
scanner cover support down and close the scanner cover.

To test print the Help List by pressing Menu/Set, 6 (Print Reports), 1
(Help List) and then Black Start. The Help list should begin printing.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309