Baseball & Softball - Page 8 - Recent Questions, Troubleshooting & Support
Forgot my password on my bushnell trail sentry
Usually you can reboot such devices by taking out the batteries and returning to the generic password that was included from the factory. Of course, you may also lose your current pictures, but this is the most expedient method to replace passwords in most electronic devices. Best of Luck!
11/4/2009 5:10:28 AM •
Bushnell...
•
Answered
on Nov 04, 2009
I aser bore sight my Bushnell banner. I need to
if it is verry tight back it off a little bit you dont want to break the seal.i have never been a big fan of the laser bore sighters.i have had a cpl and both were inaccurate.BSA makes a good bore sighter for 49 bucks.try a cpl shots with it and find out how far you are truely off.remember 1 click is 1/4 inch.in 100 yrds.in the army we had all the ammo we needed to sight our rifles in.but here in the real world with ammo prices so high a good bore sighter is the way to go.
11/4/2009 5:07:26 AM •
Bushnell...
•
Answered
on Nov 04, 2009
Need manual for bushnell model
I am sure there is one to download but did not found anything with google...
If search engines are no help, just ask some deep web specialists, e.g.
http://manualfox.com - this is a manual search agency and if they don´t find it, it does not exist in the Internet.
8/29/2009 8:54:21 AM •
Bushnell...
•
Answered
on Aug 29, 2009
Water in bicnoulars,how do I get out?
Hi, W/D here.
I only know of three ways: a hair dryer, a light bulb, or sunshine.
I use a hair dryer a lot to speed things up, and to thaw things and such. You can place the binoculars in a cardboard box, and place the hair dryer on low into a hole on the side of the box. Do not leave it unattended for obvious reasons.
I had a friend that was a jewler, and he removed moisture from watches by waving them slowly over a light bulb. Boring but effective.
You can place your binoculars in the sun, and let nature help. I'd put them in a cardboard box, and place the box on something that will gain heat. Garbage cans actually make excellent heat collectors. Orient tha box/can towards the sun, and change the position of the binoculars every half hour, or so, until they are fog free.
Best regards, --W/D--
8/13/2009 2:55:08 AM •
Bushnell...
•
Answered
on Aug 13, 2009
Yardage Pro Tour XL -
Hi,
You have already tried by changing the batteries. We are not discouraging you, but there is nothing that you can do as mentioned by other expert.
Still, let me tell you certain tip that might help :-
Check and see if you see an "M" in the display....if so hold down the
mode button for at least 5 seconds and change it back to "Y" yards.
If problem still persists, call Bushnell.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
8/7/2009 3:07:51 AM •
Bushnell...
•
Answered
on Aug 07, 2009
Bushnell radar gun always displays the same speed
Ever if Your radar gun don't display "low voltage" icon - change Your batteries, use only the best alkaline batteries (High Power) od NiMH rechargeable batteries. That will fix Your problem.
4/24/2009 8:40:27 PM •
Bushnell...
•
Answered
on Apr 24, 2009
Dropped my bushnell 1500 Mode button will not work and cannot get
Try this...while holding your thumb on the battery door, shake the unit a little....if you hear a rattle, then a lens has broken off...(rangefinder is dead) If it doesn't rattle then you have knocked it way out of alignment. It might work on a STOP sign (because its reflective) but nothing else. Send it to bushnell for repair.
Bushnell Repair Center
8500 Marshall Drive
Lenexa, KS 66214
Send $10 for return shipping and handling.
Explain your problem.
4/24/2009 2:06:57 AM •
Bushnell...
•
Answered
on Apr 24, 2009
I have a bushnell banner 3-9+40aoe but it never
Hi Andy
With regards to "instruction" what exacty do you mean?? there are a few things that they do come with in the manual like focusing the scope, Weather its First or Second Focal Plane and maintenance.
Most people who just get a scope think the manual will tell them how to shoot. This is incorrect and if this is the information your looking for its known as Exterior Ballistics. Pls clarify a little and ill be happy to help
4/11/2009 2:40:48 PM •
Bushnell...
•
Answered
on Apr 11, 2009
User manaul
http://www.bushnell.com/customer_service/manuals/rangefinders/20-0405_YP_400.pdf
Here is your Manual
If you do not have a PDF viewer, use
Foxit v3 build 1506 Free PDF Viewer
You can google it or i did for you this is the safest result i saw (its a freeware which means free software that is published and distributed from many sites ie no home site)
http://www.afterdawn.com/software/desktop_software/word_processing/foxit_pdf_reader.cfm
sry this assumes your running Windows. If not select the other OS options there are on the Foxit DL page GL
BTW please rate this post's usefullness
4/8/2009 12:35:29 PM •
Bushnell...
•
Answered
on Apr 08, 2009
Problem sighting bushnell lazer boresighter
If you are attempting to use a red laser in daylight, you have to wear special glasses to see it well. You may have to complete this project with less light, such as after dark, or indoors. Only green lasers will show up in daylight. If this is not helpful, then I suggest that you change the batteries to brand new ones that you are sure of. There is probably no adjustment possible. Best wishes for your safe shooting!
1/5/2009 3:00:30 AM •
Bushnell...
•
Answered
on Jan 05, 2009
The top of my bushnell banner scope adjustment cap is broken
Google the model number and see if it is online anywhere. If not, you may have to vist gun shows, looking closely at old, "junk-filled" tables to find a "parts" scope or a replacement. In the long run, it might be wiser to get new scope, a Leopold would be the best, even if used. Good Luck!
12/6/2008 4:20:26 PM •
Bushnell...
•
Answered
on Dec 06, 2008
Not finding what you are looking for?