20 Most Recent Samsung Xpress SL-C410W Laser Printer - Color - 2400 x 600 dpi Print - Plain Paper Print - Desktop 19 ppm Mono / 4 ppm Color Print - 150 sheets Input - Manual Duplex Print - Fast Ethernet - Wireless LAN - USB - Page 8 Questions & Answers

1, I have samsung C430W printer..I replace the transfer imaging unit but still it showing to replace it..how can I reset the page count of transfer imaging unit...please help... 2, Turn Off the Samsung C430W printer using its Power button or disconnect the power cord from the back of the device and also from the wall outlet. Else, turn Off the switch present near the socket. Wait for about a minute. Replug the cord between the printer and the outlet. Power On the device and verify if the problem is solved. 3, To reset the page count, Click the Reset Fuser Life button and then choose the OK button, this resets the fuser. If the error is not rectified, the imaging unit has to be reinstalled or replace it with a new one again. For more printer related queries get in touch with our experts by just giving a call @ 1-866-293-9220

Go to service mode and rest counter

The drum resets only automatically when it is replaced, it has a reset chip on it. Have you replaced the drum?

Dear Ankit you can replace the complete drum cart. or replace the CRUM (drum chip) of the drum cart. no need to replace the drum it can goes up to another 9000 a4 pgs. Thanks.

Some videos that may help https://www.google.com/search?q=Imaging+unit+not+installed+Samsung+Xerox+k2200nd+machine+problem ..

check the sensor and wiring to it

helllo.i have a firmware for ml1660 v34\

Printers dont reset unless you unplug them from the power connection or mains. Try again.

this is caused by a failure of the fuser unit. The fuser usually heats the paper to fuse the toner to the paper.

try replacing the hard drive, that will solve the issue

Try factory rest your printer and try printing again

Try cleaning the transfer belt and the four drums. Use a soft cloth to wipe the drum

try going to service mode on the printer, go to service function & select parts replacement alert and disable the notification on OPC so that it doesn't show toner reading.

try going to service mode and turn off the notification for the toner

The latest driver for your scanner needs to be installed on your PC.

In order for the print out to be clear, the paper path, drum and the transfer belt should be clean & the waste toner container should be empty. If doesn't work replace the drum.

you need to go to service mode and rest the counter

Test the power cable on another printer and sees if it powers it..check the power supply if it is up to or not more than the required output voltage to power the printer..if problem persist check power board of the printer and read if their is still continuity on the fuse ..read the fuse with multimeter..the fuse if the printerust have been discontinued

reset Samsung SL-M2070/M2070W Samsung SL M2070 M2070W

For me it was a standard paper jam. I pulled out the paper tray, reached under and pulled out a jammed sheet, then reinserted the paper tray and it worked.