20 Most Recent
Samsung Xpress SL-C410W Laser Printer - Color - 2400 x 600 dpi Print - Plain Paper Print - Desktop 19 ppm Mono / 4 ppm Color Print - 150 sheets Input - Manual Duplex Print - Fast Ethernet - Wireless LAN - USB - Page 5 Questions & Answers
Why would my Samsung CLX4195fw has stopped printing black, but all other colours OK?
Firstly, you have to check if the image is formed on the photosensitive cylinder, to do this you have to list a page and when it reaches the fuser unit area, open the front door, remove the cartridge and check if there is an image formed on the cylinder. All the necessary details for repairing the equipment can be found in the service manual which can be found at:https://www.anyservicemanuals.com/downloads/samsung-clx-4195-clx-4295n-clx-4195fn-clx-4195fw-sm-pg/
Samsung M2070 printer frozen and displays wait image
The printer could be configured incorrectly or not properly been set up . Check the settings and the preferences to be able to print and make sure that all of the print settings are all correct. The printer driver might be not properly installed.
Samsung ml 1666 usb printer sleeping problem
Looking beautiful. Thanks for sharing with us.<br />Please visit on these keywords :-- <b><a href="http://howtofixdelllaptop.blogspot.com/" rel="dofollow">How To Fix Dell Laptop</a></b>
My Samsung printer c1860fw keep showing me the error A1-4111 error. How can l solve this problem?
1. Before starting, turn off the power with the power switch next to the power cord then disconnect the power cord.
2. Remove any data cables since you will be spinning it all around.
3. On my printer (other models may vary) there are 5 screws that need to be removed first:
Facing the front, open the large lower front cover and remove the three screws on the front right
Turn to the back and open the back cover. Remove the two screws on the left. Notice any screws that are different and remember their position.
4. Slide the right side cover towards the back. It should come away easily. Set it aside.
How to fix the red light and not working on samsung ML-1866?
LED pattern Possible Problems and Solutions
Your system has some problems. If this problem occurs,
contact your service representative.
On Line/Error LED
lights red
• Paper jam occurs. To solve the problem, see "Clearing
Paper Jams" on page 5.6.
• The front cover is open. Close the front cover.
• Paper tray is empty. Load the paper in the Tray.
• The toner cartridge is out of toner. Remove the old toner
cartridge and install a new one. See "Installing the Toner
Cartridge" on page 2.4.
• You pressed the Cancel button while the printer is
receiving data.
• In Manual Feed mode, there is no paper in the manual
tray. Load paper into the manual tray.
• If the printer is receiving data, the On Line/Error LED
slowly blinks green.
• If the printer is printing the received data, the On Line/
Error LED blinks green fast.
Printer error A1-A4111 while sending to Samsung c1860FW Xpress printer
1. Before starting, turn off the power with the power switch next to the power cord then disconnect the power cord.
2. Remove any data cables since you will be spinning it all around.
3. On my printer (other models may vary) there are 5 screws that need to be removed first:
Facing the front, open the large lower front cover and remove the three screws on the front right
Turn to the back and open the back cover. Remove the two screws on the left. Notice any screws that are different and remember their position.
4. Slide the right side cover towards the back. It should come away easily. Set it aside.
Not finding what you are looking for?