Under the stearing wheel there is a fuse box on the left hand side, remove the pannel. Above the fuse box you will see a wiring harness with a box taped to it. Push all the cables in and test it while your doing it.
Thank you ever so much for the advice. I have 2011 Toyota fortuner that was not locking with the key or manual. Followed the instruction and wow it is working. Stay blessed.
Your advice is amazing...tried it, and now the auto-locking feature of my 2010 Fortuner is back! Thank you very much...you made me really very happy today!
×
I read your question and I think Reliable-Store can help you in this. Here's the site link. Best Manuals
SOURCE: yaris 2003 remote control lock problem
You need to reprogram the remote. Please se this website:
http://toyotaownersclub.com/forums/index.php?showtopic=85266
SOURCE: drivers door power lock wont work.
Either the wring going to that motor or the motor itself is bad.
SOURCE: 1990 toyota 4runner 4x4 wont lock in front wheels
your drive shaft thats turning is mabe broke or your automatic 4x4 lockers could be bad
SOURCE: 1998 Toyota Avalon with power door locks, front
Check this site out
you need the passenger side door lock assembly kit.
There is one posted for sale in the US on this site. just scroll down for the following information and link
Used 1998 Toyota Avalon passenger door lock assembly
1998 Toyota Avalon
passenger door lock assembly
this is the part that surrounds the lock driver side. Car color is green
cary, North Carolina 27513
The solenoid or actuator arm for the door lock assembly is probably not working to full spec.
Hope this helps.
SOURCE: 2006 Toyota Corolla. The driver's door won't work with remote.
the actuator might have been disconnected from the lock, its attached inside the door, with a metal rod that clips into the actuator, check it out, might be a easy fix, good luck and god bless, please rate me!
5,553 views
Usually answered in minutes!
×