Bush Refrigerators - Recent Questions, Troubleshooting & Support
What is the correct temperature setting for my Bush BECF99L Chest Freezer
The correct temperature setting for your Bush BECF99L Chest Freezer will depend on the specific model and the environment in which it is being used. However, in general, it is recommended to set the temperature dial to the coldest setting, which is typically indicated by an arrow pointing to the "freezing" or "max freezing" setting. This will ensure that the food stored in the freezer is at the coldest possible temperature, which will help to keep it frozen and prevent spoilage. It is also good practice to check the temperature of the freezer regularly with a thermometer to ensure that it is at the correct setting.
1/20/2023 9:57:54 PM •
Bush...
•
Answered
on Jan 20, 2023
Alarm fault Bush fridge freezer onBSBSFFSS model. Alarm going off continually. No obvious reason
Fridge keeps beeping or buzzing: The following is for Frigidaire models but others can be addressed similarly.
Several Frigidaire refrigerator models have an electronic control panel on the freezer door the owner can use to adjust the internal temperature, dispense ice and water and receive notification about issues such as the need to replace a water filter. The refrigerators also emit a beep for various actions and as an occasional alarm. Determining what causes the beeps necessitates some troubleshooting.
Temperature Controls
·A Frigidaire refrigerator's display panel blinks when the control panel is touched to set temperature controls. After pressing "Freezer Temp" or "Refrigerator Temp" on the keypad, press the arrow buttons within five seconds to increase or decrease the desired temperature. If you do not press the arrow buttons within five seconds after pressing "Freezer Temp" or "Refrigerator Temp" on the keypad, the refrigerator beeps to indicate the current setting will stay in place.
Door Open
·When you leave the refrigerator or freezer door open, the refrigerator beeps. Also, the "Door Ajar" indicator illuminates on the appliance's display panel. Shutting the door and pressing "Alarm Reset" stops the beeping and turns off the "Door Ajar" indicator light.
·The Frigidaire refrigerator has a control lock feature that prevents use of its control panel or dispensers when the unit is locked. When the control lock is active, a beep sounds when a keypad or dispenser is pressed. Release the control lock by pressing the "Control Lock" icon for three seconds. A beep will sound, and the icon's light will go out.
Power Reset
·A power reset is occasionally necessary if the Frigidaire refrigerator's control panel does not work normally or a reset function on the keypad does not work. A power reset involves disconnecting power to the refrigerator by unplugging its power cord from the electrical outlet, waiting 30 seconds and plugging the power cord back into the electrical outlet. When the control panel resets, a beep sounds. If the refrigerator beeps even after a power reset and the beeps' source is not known, contact Frigidaire.
Read more :
http://www.ehow.com/info_12148688_cause-beeping-noise-frigidaire-refrigerator.
http://www.appliancerepair.net/refrigerator-repair-1.html
8/14/2021 11:21:05 AM •
Bush...
•
Answered
on Aug 14, 2021
Model C/ISO. Freezer working. Fridge light on. Why doesn't it get cold?
Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won't have a fan). To do this, unplug the fridge and pull it out. Clean the fan blades and spin the fan by hand to see if it's stuck.
11/23/2020 6:50:39 PM •
Bush...
•
Answered
on Nov 23, 2020
Not finding what you are looking for?