Washing Machines - Page 8 - Answered Questions & Fixed Issues
Drain pipe clogged in samsung sr606-ev - how to clean it/ unclogged?
Is this the flexible pipe coming out of the back of the machine or the pipe work inside the machine? The flexible pipe (usually grey in colour) is a 'push on' fit. You'll need to get in behind the machine. With a bit of wiggling and twisting the pipe should pull off at the machine end. You should then be able to get the whole thing out from behind the machine to clean it. I used an long, old piece of wood dowel to loosen the dirt. I then carefully flushed it through using a garden hose with the nozzle set to jet, not to the wide spray pattern. I know this because I got very wet making that mistake.
Kenmore 98702 center won't drain when using cold water cycle.
Troubleshooting: Check the drain hose: Ensure that the drain hose is not clogged or kinked. If it is, straighten it out and remove any blockages.
Inspect the drain pump: Check the drain pump for any debris or foreign objects that may be blocking it. Clean it out if necessary.
Check the lid switch: Ensure that the lid switch is functioning properly. If it is faulty, it may prevent the machine from starting the drain cycle.
Check the waste hose: Ensure that the waste hose is not clogged. A clogged waste hose can prevent water from flowing out of the machine.
If this troubleshooting does not work, you may have to turn to professional assistance from a repairman.
My ELEKTA EAWM 1100 has E3, all the line and the drain motor are ok, what is its problem, please help
According to my search results, the E3 error code on your machine indicates a problem with the drainage system. Since you mentioned that the line and the drain motor are okay, there might be a blockage in the drain hose or the pump filter. You can try to remove the drain hose and check if it is clear. If it is not, you can try to clear the blockage by blowing air through it. If the drain hose is clear, the problem might be with the washing machine pump. In this case, you might need to contact a professional technician to fix the issue
Nikai 6 Kg washing machine head spinning but sticking.
Put a gallon of nearly boiling water in it for 30 minutes and then do a wash with nothing in it. That should dissolve the washing powder debris. Then stop using powder and switch to HE liquid detergent.
If that doesn't fully fix it, try a proper descaling solution like CLR or Lime Away.
Tecno washing machine error code e3
E3 means you have an error with your motor itself.
That means that it doesn't detect that your drum is moving smoothly.
Unlock the door, and spin the drum by hand to see if it spins normally. If it does, you either have a bad control board or a bad motor.
Tecno washing machine error code e3
E3 means you have an error with your motor itself.
That means that it doesn't detect that your drum is moving smoothly.
Unlock the door, and spin the drum by hand to see if it spins normally. If it does, you either have a bad control board or a bad motor.
Not finding what you are looking for?