Video Game Consoles & Games - Page 9 - Answered Questions & Fixed Issues
I have p4 computer. when i start computer booting . computer ask press f11 for bbs poppup . when i press key f11, this is not forword another page , computer prossing stop, what can i do.
It sounds like you are having an issue with the boot process on your computer. The F11 key is typically used to access the Boot Device Menu, which allows you to select a boot device other than the default boot device. If pressing the F11 key is not causing the Boot Device Menu to appear, there may be a problem with the boot process or with the F11 key itself.
Here are a few things you can try to troubleshoot the issue:
- Make sure that the F11 key is functioning properly. You can test this by pressing the F11 key in a text editor or word processor to see if it works as expected.
- Check the BIOS settings to see if the F11 key is enabled for boot device selection. The BIOS settings can usually be accessed by pressing a key such as F2 or Del immediately after turning on the computer.
- Make sure that the boot device you want to select is properly connected to the computer and is recognized by the BIOS.
- Check the boot order in the BIOS settings to make sure that the boot device you want to select is listed first.
- If you have tried these steps and the issue persists, it may be a good idea to try booting from a bootable USB. This will help you determine if the problem is with the computer's hard drive or with the boot process itself.
1/7/2023 5:54:52 PM •
Gremlin...
•
Answered
on Jan 07, 2023
•
86 views
Can I fix the internal clock on my Campark T45 game camera? It runs way too fast so the calendar stamp is always way off. Would this be a firmware issue?
t is possible that the internal clock on your Campark T45 game camera is running too fast due to a firmware issue. To fix the issue, you may need to update the firmware on the camera. Here's how to do it:
- Check the manufacturer's website to see if there are any available firmware updates for your camera.
- Download the firmware update file to your computer.
- Follow the instructions provided by the manufacturer to install the firmware update on your camera. This process may vary depending on the specific model of your camera.
- Once the firmware update is complete, power on the camera and check to see if the internal clock is running correctly.
If updating the firmware does not fix the issue with the internal clock, it is possible that there is a problem with the hardware of the camera. In this case, it may be necessary to seek the assistance of a professional or to contact the manufacturer for further assistance.
DualShock 2 stops working upon starting a game
If your DualShock 2 controller stops working when you start a game, there are a few possible causes and solutions to try:
- Check the battery level: Make sure that the controller is charged and has enough power to function properly.
- Check the connection: If you are using a wired controller, make sure that the connection is secure and not damaged. If you are using a wireless controller, try resetting the controller and re-pairing it with your console.
- Check the controller settings: Some games may have specific controller settings that need to be adjusted in order to work properly. Check the game's settings menu to see if there are any controller-related options that need to be configured.
- Check for damage: Inspect the controller for any visible damage or wear and tear that may be causing it to function improperly. If the controller is damaged, it may need to be repaired or replaced.
- Try a different controller: If none of the above solutions work, try using a different controller to see if the issue is with the controller or with the game itself.
If you have tried all of these solutions and the controller is still not working, it may be necessary to seek the assistance of a professional or to contact the manufacturer for further assistance.
What are some experiences and adventurous activities at the Statue of Unity?
The Statue of Unity in Gujarat, India is a massive monument dedicated to Sardar Vallabhbhai Patel, one of the country's most important independence leaders. The statue stands at a height of 182 meters (597 feet) and is located on the banks of the Narmada River.
Visitors to the Statue of Unity can enjoy a variety of experiences and activities, including:
- Guided tours of the monument: Visitors can take a guided tour of the statue and learn about its history and significance.
- Observation deck: The statue has an observation deck located at a height of 153 meters (502 feet), offering panoramic views of the surrounding area.
- Valley of Flowers: The valley of flowers is a picturesque garden located near the statue, featuring a variety of flowers and plants.
- Boating: Visitors can take a boat ride on the Narmada River and enjoy views of the statue from the water.
- Trekking: The surrounding area is home to a variety of trails, making it a popular destination for trekkers.
- Tent camping: The statue is surrounded by a beautiful natural setting, making it a great place to go tent camping.
- Cultural programs: The statue hosts a variety of cultural programs, including music and dance performances.
- Food and shopping: There are several food and shopping options available at the statue, including local handicrafts and souvenirs.
Can't pair any controller to my Playstation 3
It sounds like you are having trouble getting your PS3 controllers to sync with your PS3 console. Here are a few troubleshooting steps you can try to resolve the issue:
- Make sure that the controllers are charged. If the controllers' batteries are low, they may not be able to sync with the console.
- Reset the controllers. To reset a PS3 controller, turn it over and locate the small hole on the back. Use a small object (such as a paperclip) to press and hold the reset button inside the hole for about 5 seconds, until the lights on the controller flash.
- Check that the controllers are compatible with your PS3 console. The controllers should be compatible with most PS3 models, but it's worth double-checking to make sure.
- Make sure that the controllers are within range of the console. The controllers should be within a few feet of the console to establish a connection.
- If you are using a wireless adapter to connect the controllers to the console, make sure that the adapter is properly connected and working.
If you have tried these troubleshooting steps and are still having trouble syncing your controllers, it's possible that there may be a problem with the console's Bluetooth hardware. In this case, it may be necessary to repair or replace the console.
To reset the PS3 without clearing your data, you can try rebuilding the database. This process will not delete any of your saved data, but it may help to resolve any issues with the console's performance. To rebuild the database, follow these steps:
- Turn off the PS3 by holding the power button until the power indicator is off.
- Press and hold the power button until you hear two beeps: one when you first press, and another seven seconds later.
- Release the power button. The PS3 will start in safe mode.
- Use the left joystick to select "Rebuild Database" and press the X button.
- Select "Yes" to confirm and start the rebuild process.
My rock candy controller just flashes all 4 lights when turned on and wont sync
It sounds like you are having trouble getting your Rock Candy controller to sync with your device. Here are a few troubleshooting steps you can try to resolve the issue:
- Make sure that the controller is charged. If the controller's battery is low, it may not be able to sync with your device.
- Reset the controller. To reset the controller, hold down the sync button (located on the top of the controller) for about 5 seconds, until the lights flash. Then, release the button and try syncing the controller again.
- Check that your device is compatible with the Rock Candy controller. The controller is compatible with most devices that use Bluetooth technology, but it may not be compatible with all devices.
- Make sure that the controller is within range of the device you are trying to sync it with. The controller should be within a few feet of the device to establish a connection.
- If you are using a wireless adapter to connect the controller to your device, make sure that the adapter is properly connected and working.
My ecco 32 has sound bt no pictures its white
There could be several reasons for this issue, and it would be helpful to know more about the specific model of your TV and any troubleshooting steps you have already tried.
Here are a few possible causes of the issue you are experiencing:
- A faulty HDMI cable or port: If you are using an HDMI cable to connect your TV to another device (such as a cable box or streaming device), try using a different HDMI cable or port to see if that resolves the problem.
- A problem with the TV's display: If the TV's display is damaged or not functioning properly, it could cause the picture to not show up. This could be due to a hardware issue and may require professional repair.
- An issue with the TV's settings: It's possible that the TV's picture settings may be set to a mode that is causing the picture not to display. Try going into the TV's settings and checking the picture mode to see if that resolves the issue.
1/2/2023 5:27:00 PM •
Video Game...
•
Answered
on Jan 02, 2023
•
49 views
Milk into psp
I think I just emailed you a Quote on Repair of this, if your name is Dennis. If you cannot get it repaired at the Quote A gave you. I suggest you open the case and clean up the entire unit. This may lead you into a majorly disabled PSP. I have great experience at doing this. The Milk can cause a form of electroplating to occur in your PSP. Where the Circuit traces run, power from the battery and the milk costing will actualy cause metal to migrate from on spot to another. You Joy stick and Pads at probably already joined or Shorted. My price is not bad. and less than the price of a Game. I gurantee the repair for 90 days. If your not Dennis, I suggest you click on " Repair Directory" and On the next Screen select " Video Game Consoles". Pick a good service. My service is listed near the top.
PS2 slow in reading disc but plays game intro and can select to load a save from card but no video only audio when save loaded
It sounds like you are experiencing an issue with your PlayStation 2 (PS2) console where it is slow to read discs and is only able to play the intro and allow you to select a save file from a memory card, but there is no video when the save is loaded. There are a few potential causes for this issue:
- Dirty or damaged disc: If the disc is dirty or damaged, it may not be able to be read properly by the console. Try cleaning the disc with a soft, dry cloth and make sure there are no scratches or other visible damage.
- Console laser lens is dirty or damaged: The laser lens inside the console is responsible for reading the disc, and if it is dirty or damaged, it may not be able to read the disc properly. Try cleaning the lens with a soft, dry cloth, and if the issue persists, it may be necessary to have the console repaired or replaced.
- Memory card issue: If the issue only occurs when loading a save file from a memory card, the issue may be with the memory card itself. Try using a different memory card to see if the issue persists. If the issue does not occur with a different memory card, the original memory card may be damaged or corrupted and will need to be replaced.
If none of these steps help resolve the issue, it may be necessary to have the console repaired or replaced.
Regenerate response
C4070 ACCURIO PRESS CONTROLLER UNCONECTED
It sounds like you are having an issue with your Accurio Press controller becoming unconnected or disconnected. There could be a variety of reasons why this is happening, so here are a few steps you can try to troubleshoot the issue:
- Check the connections: Make sure that all the cables and connections between the controller and the device it is controlling are securely plugged in and functioning properly.
- Restart the controller: Try restarting the controller by power cycling it. To do this, turn off the power to the controller, wait a few seconds, and then turn it back on.
- Check for updates: It's possible that there may be a software update available for the controller that could fix any issues you are experiencing. Check the manufacturer's website to see if there are any updates available.
- Check for interference: If you are using a wireless connection, make sure that there is not any interference that could be causing the connection to drop. This could include other devices operating on the same frequency or physical barriers such as walls.
12/31/2022 9:57:10 AM •
Video Game...
•
Answered
on Dec 31, 2022
•
59 views
Not finding what you are looking for?