Electrical Supplies - Popular Questions, Answers, Tips & Manuals
I have an 1850 Coleman powermate that spews gas from gas cap vent, replaced with new one and still does it. How do I fix?
Troubleshoot this problem:
Check Fuel Level: Ensure that the fuel level is not too high. If the tank is filled to the brim, it might cause excess pressure and lead to fuel spewing from the vent.
Gas Cap Design: Some gas caps have a metal cone inside to deflect fuel away from the vent hole. Make sure you have the correct gas cap for your generator. The vent hole may not go through the top of the cap but vents under the gasket inside it.
Vapor Lock: Coleman customer support suggests that vapor lock could be a possible cause. Try the following steps:
Clean the carburetor and its bowl.
Disconnect the gas line to ensure it's clear.
Use fresh fuel.
Inspect the Gas Cap: Double-check that the new gas cap you installed matches the correct part number according to the parts list.
Replace the Gas Cap: If all else fails, consider getting a replacement gas cap specifically designed for your Powermate 1850 generator. You can find suitable gas caps online or at authorized dealers.
PowerMate Formerly Coleman Gas Caps 4-Cycle - Jacks Small Engines
4/19/2024 4:05:10 AM •
Coleman...
•
13 views • 0 helpful votes
Pramac px5000 plug stuck in ac socket
If the plug of your Pramac PX5000 generator gets caught in an AC socket, follow these steps: 1. Turn off the electricity to the socket.2. Wear insulated gloves for safety.3. Gently wiggle the plug while pulling it out.4. Apply a bit of lubricant if needed.5. Use insulated pliers to grip and pull the plug.6. If you cannot take it away, get help from an expert electrician to keep it away from harm or injury.
2/9/2024 10:24:08 AM •
Pramac...
•
23 views • 0 helpful votes
How to remove tank on a honda eg5000cl generator
This is reasonably easy to do. Does the Generator run? Start the generator as it's running turn the fuel Petcock to the Off position. The generator should stall and stop running. This helps safely empty the fuel line and carburettor between the tank and the engine.
Disconnect the fuel line from the petcock tap and plug the ends to stop dirt getting in. On each corner of the tank itself there should be a bolt going through the ribbed edge and a rubber spacer. remove these 4 bolts and the tank should lift up and out. On some generators you might have to remove some trim panels to make it easier.
Refitting is the exact opposite of this.
Steamist Steam Generator.
When I start my steam generator it stops at 32 temperature giving double EE error. What should I do?
Question edited for clarity and spelling of the maker.
Question moved from Laundry Irons category.
I found this
On 2021-12-23 by Inspectapedia Com Moderator - Diagnose & Clear an EE error code on some Steam Generators
@mike c,
Diagnose & Clear an EE error code on some Steam Generators:
What are the brand and model of your steam generator?
I ask because error codes are not universal across all steam generator brands and models.
But on the off chance we can GUESS usefully
Your steam generator may be receiving water at an excessive pressure. We've seen this EE error code reported for Happybuy Steam Generators (Amazon):
Check the water pressure being delivered to your unit to be sure it's not higher than is permitted by the IO manual or try reducing the supply pressure to 5 psi.
Then turn the unit off and drain pressure from the unit. Leave it off for a few minutes or longer. Then return power and water supply - at 5 psi.
More here including a link to the maker
https://www.google.com/search?q=steamist+steam+generator+ee+error+code
..
Not finding what you are looking for?