AEG Washing Machines - Page 8 - Recent Questions, Troubleshooting & Support


Pull front nozzle downward and at the same time pull the drill bit out i take this is sds type of drill try it.

AEG Washing... | Answered on Sep 18, 2017


Wonderful question!

AEG Washing... | Answered on Sep 15, 2017


it is called an inlet valve and the PCB controls when it opens/closes . call a repair service

AEG LW1250 Front... | Answered on Sep 06, 2017


Hi,

E60 error code is a heating problem.
What you need to do is take the back cover off and from there you will see the heater in the back of the drum at the bottom.
Make sure the wires are still in place on the heater. If they are then you will need a multimeter and meter the heater out. It should read about 28 ohms. If faulty then it will need to be replaced.
If the heater and the wiring check out OK then its probably the control board that's the problem here i am afraid.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

AEG Lavamat... | Answered on Aug 28, 2017


You are using a cleansing agent that has no biological cleaning agents so it does not clean off all the organic debris.
All very well for those with sensitive skin but not for the machine.
Try lemon juice to de grease the boot.

AEG Washing... | Answered on Aug 03, 2017

Not finding what you are looking for?
AEG Logo

1,530 questions posted

Ask a Question

Usually answered in minutes!

Top AEG Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

sami

Level 1 Expert

24 Answers

Vincent G
Vincent G

Level 3 Expert

2361 Answers

Are you an AEG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...