...derby , inspection cover, & 2004 harley low rider. torque specs for derby , inspection cover, & trans & oil plug. Thanks! what is the torque specs for a derby cover on my 2009 Soft
...amp; 9 to 46 Ft/Lbs torque short bolts 7,3,2,6, & 10 to 43 Ft/Lbs Step 2: torque all bolts an additional 90 degrees Recheck final torque in sequence *** CAUTION *** engine uses Torque To Yield ...
torque) & the rod bearing caps are 38 ft/lbs (final torque). If you have the 4.3, the main bearing caps are 77 ft/lbs (final torque) & the rod bearing caps are 45 ft/lbs (final torque). I hope
...torque head bolts #1,2,3,4,5,6,7, & 9 in sequence to 10 Ft/Lbs Step 2: torque head bolts #1,2,3,4,5,6,7, & 9 in sequence to 20 Ft/Lbs Step 3: torque head bolts #1,2,3,4,5,6,7, & 9 in ...
...amp; 9 to 46 Ft/Lbs torque short bolts 7,3,2,6, & 10 to 43 Ft/Lbs Step 2: torque all bolts an additional 90 degreesRecheck final torque in sequence *** CAUTION ***engine uses Torque To Yield ...
...amp; torque in 3 steps. Say it is 90 Ft Lbs. Tighten 30 Ft Lbs, Then 60 Ft Lbs, then 90 Ft Lbs. On an aluminum head; start in the center, top, (or bottom) take it to the 1st 30 ft lb, go to the bolt ...
...damper bolt torque 80 - 94 ft lbs, fly wheel bolts torques 94 - 101 ft lbs. 2012 Kia sorento LX 2.4l G4KE what is the crankshaft main & rod bearing torque specs & the head torque ...
...torque bolts 7 & 8 (15 Ft/Lbs & 90 degree turn) Step 3: torque bolts 9 & 10 (22 Ft/Lbs & 90 degree turn) Recheck final torque in sequence *** CAUTION *** This engine uses "Torque To ...
Question about 2005 CRF 250 X
torque specs - CRF250R & RX - ThumperTalk Aug 10, 2007 bottom end torque specs - CRF250R & RX - ThumperTalk May 20, 2009 More results from www.thumpertalk.com Left side cover torque specs 2005
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions
