Questions & Answers for: pull chord repair

short The iron only works when you pull up and back on the chord.. No local repair places want to work on it You need to replace it's cord.

...chord chain was stuck on slot groove way to rotary switch inside you ceiling fan,the only way to repair this to disconnect and pull out the ceiling fan and dismantle the housing whrere the control ...

...chord will barely pull. I removed the screw and flushed out the fuel and the rip chord pulls fine, but once I put it back in the pressure builds again and can't get the saw to start. Any ideas? I ...

...chord. would like pictures and cut sheet or written details. any help would be appreciated. Thanks The cord is item #26 in this parts diagram. You can order it from Kitchenaid, or you can cut the old ...

...pull chord snapped in half where do my pull chord snapped in half where do i get a replacement chord and how do i fix it? Go to smalleng.com they have video on how to do what you need. Check it out ...

pull chord assembly removing the pull chord as one unit, 3 philip screws need to be unscrewed or 3 rivets need to be drilled out to unfasten this assembly, after this is complete you will remove the 3

...metallic chord that had worn out and snapped. What do I do? Have it towed to a repair shop,you knew that Dont mess with it. A mechanic might be able to connect a new one and pull it thru rather

pull chord can't be pulled and is jammed. What should I check? Please advise I HAVE SEEN THIS HAPEN SO MANY TIMES,,,,PLEASE TAKE OFF YOUR SPARKPLUG WIRE AND TILT THE MOWER UP AND TURN THE BLADE BY

pull chord is very hard to pull and i usually have to take off the mechanism and readjust it REPAIR OF THIS SORT USUALLY REQUIRES REMOVAL OF THE FLYWHEEL AND WITHOUT THE PROPER TOOLS AND KNOWLEDGE YOU

...chord wha do i do or where do i go i live in brampton ontario!! please help by dangling ipod while connected or pulling out by cord you broke wiring you can look up an electronics place in your area ...