Questions & Answers for: mantis carb adjustment

...Mantis Tiller will not start. It was at least starting before but would not stay running. Now it will not start at all. I am looking for someone to guide me on how to adjust the high and low idle ...

mantis tiller 2 cycle seemed as if it was running out of gas pulled the carb and blew it out/ runs much longer but still dies. could the float need adjusting? it has fresh gas. new plug. it runs long ...

MANTIS TILLER THAT ABSOLUTELY WILL NOT IDLE.  I HAVE INSTALLED A NEW CARB KIT, CHANGED GAS, CLEANED THE GAS FILTER, TRIED TO ADJUST SEVERAL TIMES,CHECKED THE VENT LINE. THE ENGINE RUNS LIKE CRAZY

...mantis will not stay running unless the choke is out all the way, I've changed the the intank fuel filter, and cleaned the carb. I've adjusted the HI LO needles all over the place and still no luck ...

...carb. jet settings for the Mantis tiller? When the engine and carb were new, the factory settings were 1 1/4 turns out. As fuel deposits form and things wear, it is normal to need occasional ...

...carb adjustment screws but his Mantis does not have any color on these adjustments screws. There are three screws but can someone tell me which is which? I will add some paint to them so I know for ...

mantis tiller starts rt up, good idle no power,new fuel lines plug,filters,rebuilt carb,when trying to rev bubbles in gas tank? o tines on air filter off, tried to adjust carb still no difference. ...

...I do.I took it to an "authorized" dealer and they wanted more to fix it than I paid for it brand new!!!!!!!!!! How Adjusted the Carb on My Mantis Tiller So It Would Run and Run Smoothly hope this ...

Where's the high adjust screw located. On mantis tiller ON THE CARB OF COURSE

Mantis cultivator when starts at first dies at low idle Then wont restart everything fuel filter to coil is new Implies carburetor low speed fuel circuit lean. Increase low speed fuel/air. Initial ...