Questions & Answers for: only half of jets work

Question about 2770.018w.020 Cadet Whirlpool White

1 Answer

...is only a year and half old and is in a vacation home/rarely used. The tub is built in, so access to the works is limited. Most of these jets turn to close. Check if you turn the nozzle. Hope it ...

Ad

Question about 2770.018w.020 Cadet Whirlpool White

1 Answer

...jets are not working and one jet isat half flow, how do i remove the plactic inserts and un clog the jets?? the outer ring on the out side will unscrew, just be gentle and you may have to use a large ...

Ad

Question about 2770.018w.020 Cadet Whirlpool White

1 Answer

jets are not working as efficiently as they were origionally-appears power is poor-only half the strength of what it was. Well the 2 clues you give make me think the motor is dragging or the jets have

Question about 2770.018w.020 Cadet Whirlpool White

1 Answer

...jets by carefully turn the running jet to the completely closed position. count how many turns it takes ( I usually count in half turns) to close the jet all the way (turn clockwise) then back out to ...

Question about 1993 Monster 900

1 Answer

...work the pilot jet and air fuel screw. Now do you have your air fuel screws 2 half turns out from dead bottom make it one full turn, or 2 full turns and one half from dead bottom. if you have not ...

Question about 1993 Monster 900

1 Answer

...jets and close them to half air flow see what happens once they are closed half way move to the ones that are not working and turn them to the half position. You must remember it takes a window of ...

jets for 10-30 seconds and that's it. HELp Only half the display is working, there's no heat and the jets wont turn on. If I trip the curcit, I can get the hot tub jets for 10-30 seconds and that&

...half of my jets on one side of the tub only.I have tried closing the jets that do work half,does not make a difference to the jets not working.Would it be best to empty the tub and start over? it's ...

...half the jets are working in a Mirolin massage tub Fill the tub until the jets are covered by 2-3 inches of hot water. Add 2 Tablespoons of a low-suds liquid dish wash soap and 1/2 cup of white ...

...half your jets are working in a Mirolin Massage bathtub Fill the tub until the jets are covered by 2-3 inches of hot water. Add 2 Tablespoons of a low-suds liquid dish wash soap and 1/2 cup of white ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Home Experts

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66855 Answers

Are you a Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...