Questions & Answers for: gm 5 crank sensor location

Question about 1986 Fiero

3 Answers

...Rock! I've got 5 of them. had same problem with a few gm cars. every time it was the control module in the distrib. 2xs i got faulty ones from auto parts stores. returned and vvvvmmmmm it

Ad

Question about 1998 Sunfire

1 Answer

...GM V.A.T.S page for more information. To remotely start a car with this feature, you must bypass the PASSLOCK system. There are two methods of doing so.. The first, is to permanently bypass this ...

Ad

Question about 2004 RX-8

3 Answers

...GM HEI ignition modules are notorious for this. If you are working on a distributorless ignition system with a Hall effect crankshaft position sensor, check the sensor's reference voltage (VRef) and ...

...GM V.A.T.S page for more information. To remotely start a car with this feature, you must bypass the PASSLOCK system. There are two methods of doing so.. The first, is to permanently bypass this ...

Question about 1996 Cutlass Supreme Coupe

2 Answers

...5.2 volts. If it is low, suspect a shorted sensor. Note that several sensors are served by the same VREF circuit. I had one GM 3.1L engine that was running like **** and smoking black that had only 2 ...

Question about 2000 Grand Am GT

2 Answers

...5 volt reference is there, then the computer is on line and most likely not the problem. Does the check engine light come on when you key up. If it does, then the computer is receiving power. If the ...

5-6 times. If there is no fuel being pumped into the container you need to replace fuel pump. You hook up a fuel pressure gauge . No pressure does not mean the fuel pump is bad , could be a electrical

GM. there are many parts. for ignition the CMP sensor in the distributor the ECU , generates all spark via the ignitor and it runs the coil. so what module do you what? my wild guess is you have spark

...GM or G13BA is suzuki name and real. http://www.fixkick.com/swift.html the Diagnostic connector, use the jumper and see if there are FLASH codes, yet. that be top of my list. 1: compression at spec, ...

Question about 2003 Blazer

2 Answers

...5-88 the only thing listed for ECM1 is Engine Control Module Injectors https://my.gm.com/content/dam/gmownercenter/gmna/dynamic/manuals/2003/chevrolet/blazer/2003_chevrolet_blazer_owners.pdf If you ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...