Questions & Answers for: how to change a pilot

Ad

Question about GF-10 Deep Fryer

1 Answer

...does the regulator need to be changed to a propane type?...i just bought unit so not sure if valve is good You definitely need to change the spring in the regulator. May need new pilot ...

Ad

Question about 3003622 Ceramic Wall Mounted Panel Heater

1 Answer

...the pilot light is lit. ..So if the flame doesn,t go past the thermo-couple it won, make mili-amps or its tme to change out the thermo-couple, They only cost lest than $8:00 and you can change

Ad

Question about 3003622 Ceramic Wall Mounted Panel Heater

1 Answer

...If the pilot light is on but goes off when you release the button then the thermopile need to be changed. Hope this can

Question about 3003622 Ceramic Wall Mounted Panel Heater

1 Answer

Pilot light goes out when burner stops.I have change therm.couple & gas value try cleaning pilot or changing pilot injector , see if pilot is too small,

Question about 2509612 Ceramic Mid-Size Heater

1 Answer

...pilot its the sensor that sends the signal to valve to say theres a flame here i can stay open firstly try tightening thermocouple connection at valve then replace if didn't change a thing and if ...

Question about (5040B750) Patio Heater

1 Answer

...and make sure it is screwed into valve properly (do not over tighten). If the pilot still doesn't go change the thermopile and if that don't work change the valve, but it most likely the ...

Question about 6501922 (NG) Gas Compact Heater

1 Answer

yellow and approximatley 3 or 4 inches long and also when I turn on the control valve I can hear gas before I press the knob down. did you change the pilot injector as well or have you put it back in

Question about 6501922 (NG) Gas Compact Heater

1 Answer

sure you have the thernocouple mounted as close to the center of the pilot flame hold the pilot button down for several mins. If none of this works then you may have to change your gas valve.Thank you

Question about Mr Heater Portable Buddy Propane Heater

1 Answer

allpro convection heater model# mh200cv wont stay burning first pilot wouldnt stay lit changed thermocouple made hood for pilot burner to get pilot to burn close to thermocouple pilot stays lit turn ...

i changed the thermo coupler and the pilot light does stay lit but the burners won't light i changed the thermo coupler and the pilot light does stay lit but the burners won't light If you

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kitchen Appliances - Others Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Irene Tulloch

Level 2 Expert

498 Answers

john h

Level 3 Expert

22486 Answers

Are you a Kitchen Appliances - Others Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...