AEG OKO LAVAMAT 6100 Digitronic hot and cold fill washing machine on cold water feed only Yes. There is a part that allows you to connect the cold water supply to both the hot and cold inlet hoses. It
AEG oko-lavamat 72630 update had a blockage problem which i soon fixed.then turned machine back on and it flashed e90 at me. now it wont even turn back? Please help It is a communication problem ...
Question about Lavamat 72640 Front Load Washer
...aeg oko lavamat 72640 update keeps stopping in the middle of programmes. Sometimes the stop/pause button flashes but pressing it doesn't restart the programme. At other times the indicator shows a ...
Question about Lavamat 72640 Front Load Washer
AEG OKO lavamat 538 - half load must the button be in or out OKO lavamat 538 - half load must the button be pressed in for the half load or be raised press it in
Question about Lavamat 72640 Front Load Washer
...functioning. Machine is AEG oko lavamat 72640 Could the machine be overfilling due to a faulty pressure switch (controls the amount of water in the drum). Splits in the door seal or broken
Question about Lavamat 72640 Front Load Washer
oko lavamat 74640 update showing error E20 what does this mean? its a draining error, check sump, pump and drain hose for blockage failing that it needs a new pump.
aeg oko lavamat 72600 update, ce error code showing any idea? error code ce is a faulty water distributor fault . you have to replace the top part of the soap dispensor compartment. sometimes you can ...
Question about Lavamat 72640 Front Load Washer
AEG OKO LAVAMAT 72630 is showing E20. what does it mean? Error code E-20 means drain problem. It means that the machine is not draining water correctly. Check the drain hose, to see if it is kinked or
Question about Lavamat 72640 Front Load Washer
aeg oko lavamat update starlight. first it was showing the c7 error code than we have reset it and it emptied the tank. but when she tries to start the programme she does not load we called a mechanic
Question about Lavamat 72640 Front Load Washer
...AEG OKO LAVAMAT 72640 keeps stopping mid cycle and flashing error cod E10 what can I do? The water Supply 1. First, check that the tap is not accidentally turned off. 2. Check that the gray water ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions