How to I reset my Affinity to factory settings? I know you hold down to buttions for a few seconds but I forgot which buttons they were.

Question edited for clarity.
Question moved to Affinity.

Try a full system reset. If that doesn't work, you need a service call.

Resetting the Frigidaire Affinity washer

• Unplug the power source or turn the circuit breaker off for a few seconds.
• Then plug the power back on to reset the washer to default settings.
• Now press the cancel button to cancel all commands.
• And in the next step press and hold the spin speed and soil level buttons together for four to eight seconds.
• Hold the buttons until you hear some signal sounds and then leave the buttons.
• After that open the door for more than 2 times and make sure it gets closed again each time. After this, your machine has been properly restored to proper default settings. This will lead your machine to work properly again.

..

Well you did not list the model so for me to return mine to factory setting I have to press and hold these two buttons at the same time ( spin speed, soil level) until I hear a signal sounds a few seconds or so. the other is (cancel and pause.) or cancel and any cycle.

Performing a factory reset from settings

1. From the Home screen, press MENU , and then tap Settings.
2. Tap Storage > Factory data reset.
3. Tap Reset phone, and then tap Erase everything.

Performing a factory reset using hardware buttons
If you can't turn HTC Rezound with Beats Audio on or access settings, you can still perform a factory reset by using the hardware buttons on HTC Rezound with Beats Audio.

1. Remove the battery, wait for a few seconds, then reinsert the battery.
2. Press and hold the VOLUME DOWN button, and then press and hold the POWER/LOCK button.
3. Wait for the screen with the three Android images to appear, and then release the POWER/LOCK and VOLUME DOWN buttons.
4. Press VOLUME DOWN to select FACTORY RESET, and then press the POWER/LOCK button.

Resetting HTC Rezound with Beats Audio

you will have to reset to factory settings. each tablet is different but usually you can hold down the volume down button at the same time as the power button and keep them depressed until the system resets and reloads the operating system. this may take a few seconds to initiate and several minutes to complete.

You can reset it using iTunes. Open iTunes, plug the iPod in using USB, then turn of the iPhone, once it's off hold down the home and lock buttons for 10 seconds, then release the lock button while continuing to hold the home button. After a few seconds iTunes should detect the iPhone. Then you should be able to restore the iPhone back to factory defaults. Even if you forgot the password.

You can reset the device to the default factory settings by holding down the reset button for 7 seconds. The default password is blank.
Now you can log into the router using an Ethernet cable, the default IP is 192.168.2.1.

If you reset the router you will lose all the settings of the router.
On the router you will find a small reset button .
Hold it down for 30 seconds.
Unplug the power cable and plug it back in.
wait for 30 seconds and then reconfigure the router.
Click Here for more info about router set up.

Hold the remote control's STOP ( ) button for
longer than 5 seconds. “INITIAL” appears on the display and
all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.

Press CH2 and Alarm buttons on monitor at same time and hold for a few seconds...goes to factory reset.