At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
My washer stopped in mid cycle. I unplugged it for 5 minutes hoping for a reset but no fix. I then cut the circuit breaker for 5 minutes, still no reset. The error code is E66 Model is 2940E0
Re: My washer stopped in mid cycle. I unplugged it for 5...
E66 error is for "heating element relay failure". You need to replace the "water inlet valve".
If you can post the model number off of the machine I can direct you to the part you will need.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try resetting it.... To force reset a Kenmore washing machine, you must turn off the power and allow any juice inside the circuits to clear out. This is called a power cycle. Turn the machine off and unplug it or turn off power at the circuit breaker > press and hold the "Start" or "Pause" button for 5 seconds > wait about 5 minutes for the electrical charge to clear out of the washer > power the washer up again.
I understand that your Frigidaire washer stops 2-4 minutes into the cycle. I suggest resetting your appliance, by either unplugging it or shutting the power off at the circuit breaker, for 3-5 minutes. Restore power and start any cycle. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your appliances status has changed successfully. Hope this is helpful.
I understand that your Frigidaire dishwasher, model# FDB4315LFC2, starts and then stops, and flashes a "PF" code when it stops. The "PF" code is stating that there has been a power failure. There could be a possibility that your dishwasher is losing power mid-cycle. I suggest checking your home's circuit breaker, the wiring to your dishwasher, and if you have a cut-off switch, checking that as well. I also suggest resetting your appliance, by shutting the power off at your home's circuit breaker, for 20-30 minutes. Restore power and start any cycle. If further troubleshooting is needed, I ask that you please let me know the error codes displayed on your appliance. Hope this is helpful.
I understand that your Electrolux washer will not complete the spin cycle, and stops with 6 minutes left. I will be more than happy to assist you. I suggest resetting your appliance, by either unplugging it or shutting the power off at the circuit breaker, for 3-5 minutes. Restore power and try any cycle. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your washer status has changed successfully. If further troubleshooting is needed, I please ask that you leave the model number of your washer in your response. Hope this is helpful.
I see that you are receiving an AD error code on your laundry center, model# FEX831CS, and your dryer is stopping mid-dry. I suggest giving your appliance a hard reset. You will do this by either unplugging it or cutting the power off at the circuit breaker for at least 2-3 minutes. When power is restored to your dryer, if it is still showing an AD error code, I suggest you contact your local authorized technician. I hope this is helpful.
Ron kundrat,
So I understand that you are unable to operate the water temperatures and soil levels on your infinity washer, while on the normal cycle.
I suggest to give your appliance a hard reset. You will do this by either unplugging it or cutting the power off at the circuit breaker for 3-5 minutes. After the 3-5 minutes, bring power back and try to start a cycle.
If you are unable to change the water temperature and soil level settings, while in the normal cycle, I suggest to contact your local authorized technician. They will be be able to come out and diagnose the washer and see why you are unable to change the settings.
Hi Andrew - Try
resetting the unit by either unplugging it or flipping the household circuit
breaker to the off position. Wait roughly ten minutes and turn on the
dishwasher. Confirm that the door is properly latched and try selecting a
cycle. If resetting the power does not correct the issue, it could potentially
mean a number of things: wiring failure, damaged cord, faulty door latch
assembly or control board. I would
personally contact a professional to accurately diagnose the washer to
determine the root cause to reduce the risk of unnecessary parts.
My dishwasher just quit mid cycle. (still has water in it) It is a whirlpool partner 1. I checked the breaker and it wasn't tripped... but i reset it anyways. When I tried the dishwasher again it worked for a second and turned off. I have done reading about the thermo fuse but can't find it. Not sure how big of a problem this is.
Dishwasher is 5 years old.
×