Sony Cyber-Shot DSC-W30. The lens is in a "stuck" position

When I turn on sony cyber-shot camera I get a Problem with the Sony Cyber-shot DSC-W35 Digital Camera when I turn on sony cyber-shot camera I get a screen display that states "access". The lens keeps going in and out and then it states,"turn the power off and on again" What's wrong??

Try these procedures.

power on to auto lens up and dowen

Hi!
If you're sure you didn't damage the lens flat cable which connect to the motherboard, the focus of the lens unit you bought on ebay doesn't work. You can simply replace the back part (with focus) of the new lens unit with your old one. It requires soldering.

Tom

Its lens error in your DSC-W35 camera.
Lens mechanism is either stuck or not retract completely and system control sense this error. Please replace lens assembly to get it fixed because lens mechanism is not repairable.
Thanks.

problem in Len unit repair or replace

Sony maks good products and stand behind they product, but they do have a problem with the batteries , change the battery and i bet u will not have that problem

try these:-

• connect it to pc and on it
• vaccum the barrel of lens
• changing mem. card and batt. for 2min.
• shake it.
• on and off in different positions

Shoot 10-15 times hard thats all..

possible bad lens assembly.These can only be replaced try alamo camera service .com