WATCH SET TIMEX INDIGLO .CHANGE FROM 24 HR TO 12AM 12PM

https://oureverydaylife.com/how-to-change-timex-watch-to-military-time-12269615.html

Note the use of Mode and Set buttons to change.

Video showing how to set a similar watch:

https://www.leaf.tv/articles/how-to-set-the-date-for-a-timex-expedition-indiglo-watch/


How to Set the Date for Timex Expedition Indiglo Watch LEAFtv

hi Janet.
You may also need to change the time when traveling or to adjust for daylight saving time.

1. What to Look For. Locate the MODE button, the SET/INDIGLO button and the START/STOP button on the side of your Timex Indiglo WR 30M.
2. Setting the Hours. Press down the MODE button until "TIME" appears. ...
3. Setting Minutes and Date

https://oureverydaylife.com/how-do-i-change-the-time-on-a-timex-indiglo-wr-30m-12421830.html
How to set the time on timex WR30M watch Google Search

Mate here's the link for Timex Indiglo instruction manual.... CHEERS
https://www.timex.com/sites/default/files/W116_M555_NA_EN_4.pdf

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all TIMEX watch manuals.Rate me, please.

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all Timex watch manuals. Rate me, plz.

If it is the five button type I have (there are several) you hold "SET" until a field starts flashing. Then hit "MODE" until you see "24-HR" in the display. Hit "LAP/RESET" once and it should display "12-HR". Hit set again and you are done. Also note that timex has all manuals available online for free,searchable by the "module number" you can find on the back plate of your watch. Hope this helps.

Press and hold the MODE button (bottom left) for approximately 3 seconds.

When the Alarm set time starts flashing, press the MODE button once more. Now the seconds for the watch time should be flashing.

Use the START/STOP button (top right) to move bewteen items and the SPL/RESET button (bottom right) to change the item.

Moving between all items, it will take you through: seconds, minutes, hours, month, date, day of the week. Simply press MODE when your settings are complete.

If your set up is: Top-Left=Indiglo Top-Right=St./Stop Bottom-Left=Mode Bottom-Right=Lap/Reset

Than follow these steps:
1. Press Lap/Reset and hold. You should see the time the alarm was set for.
2. While holding Lap/Reset, press Mode.
3. Let go of all buttons.
4. There you go!

Hope that was a help

NOTE: 12/24 HOUR TIME IS SELECTED BY PRESSING RESET/LIGHT ONLY WHEN THE HOURS MARKER IS 
FLASHING. THE “A” OR “P” WILL DISAPPEAR WHEN THE 
WATCH IS SET TO 24-HOUR TIME.