How to convert from LP back to Natural Gas?

33002924 is the lp to nat. gas conversion kit part number
https://www.maytag.com/digitalassets/MLPDF/Installation%20Instructions%20-%2040136401.pdf

all you need,
33002924 Maytag Dryer LP To Natural Gas Conversion Kit Parts Dr

http://fixitnow.com/wp/2009/03/13/converting-a-gas-dryer-from-natural-gas-to-propane/

NEED TO CHANGE GAS ORIFICE. THEY ARE DIFF. BETWEEN NATURAL GAS AND PROPAIN THATS ALL YOU HAVE TO DO.

Hi,

Thank you for contacting Fixya.com.

Please check the bellow links to have an in-depth knowledge related to your query:-

http://www.ehow.com/how_5321294_convert-dryer-natural-gas-propane.html

http://fixitnow.com/wp/2009/03/13/converting-a-gas-dryer-from-natural-gas-to-propane/

Please get back to us if you have any further query.

Have a nice day.

Hi,

Hotpoint supplies the orifices and instructions with each range for converting. It is just that it is hidden, they attach it to the gas regulator. The regulator is near the bottom back typically. Here is a cut out from your use and care manual.

CONVERTING TO LP GAS (or converting
back to natural gas from LP)
This range leaves the factory set for use with natural
gas. If you want to convert to LP gas, the conversion
must be performed by a qualified LP gas installer.
The conversion instructions and LP orifices can be found
attached to the range next to the pressure regulator.
Keep these instructions and the orifices in case you want
to convert back to natural gas.

Before you attempt to covert to lp. You need to check the flue. Black smoke is cause by incomplete combustion. So it may be now plug with black soot. Heat-exchanger may be damage Before you invest in a lp kit. Make sure it is worth it. To convert you need the main burner orifices and lp spring for gas value. Once you replace these parts you must adjust gas pressure, nat gas is measured at 3.2 - 3.5wc lp is measured 10.5 - 11.00 wc. In my honest opinion this is to dangerous for customer to attempt. Please a HVAC contractor inspect unit and install lp kit.

Hello there. If the parts were saved, they can be reused. If not, contact your propane provider and tell them that you plan to convert back to natural gas. They will be able to get you the kit you need, and will possibly have a technician come out and install it for a fee.

Here is a link to a thorough explanation of what is involved in a conversioin and what to look for.

http://www.propane101.com/lpgasapplianceconversions.htm

i do not think any propane type heater may be unvented but check with manufactorer

Call Maytag or whirlpool!
Whirlpool makes Maytag now same company
They make a conversion kit!

ngafm at your service.
Please rate me before you sign out!