I have had the same problem. If you switch the machine to off and then to cotton/linen 95, then press at the same time prewash, soaking, qick wash and stain buttons for 10 seconds switch it off. When I switched it on it worked.
Can you switch back to off - then to orginal programme - only the start light may show - what i did then was press all of the 4 button for rinse, spin short wash and held them in place - fro upto 10 secs - machine seemed to reset itself and it worked
1,626 views
Usually answered in minutes!
The machine always went straight to all lights flashing when switched on [not only start light illuminated alone].
We had to shell out £100 for someone to fit a new 'programme board'.
At least the machine is operational again.
I bought a second hand Dyson CR01 Memory Flow in the interim and that is serving very well. Fantastic capacity. It's four years old. Dyson replaced the drum and a couple of peripherals last year for the previous owner.
Does anyone know the life expectancy of a Dyson serving a young family of nine persons?
I am unable to test the 2nd contribution, because as I said, I have already shelled out £100 to an engineer who fitted a new circuit board.
machine is stopped. wash and rinse lights are flashing. tried unplugging for awhile and plugging back in to no avail.
Not starting to wash. Red lights lit up on wash and rinse. Bosch 1200 washing machine.
wash smart machine wash light flashing and machine won't start
rinse problem
on/off and rinse hold lights flashing and wash cycle not functioning
Stops washing start light and washing light flashing
cycle would not complete final spin. wash, rinse & spin, final spin lights on, door locked light flashing
cycle wont complete final spin wash, rinse & spin, final spin lights on, door locked light flashing. pressed started/cancel button for 3 sec cleared lights and door opened.restarted cycle again , started as normal for 10 sec then stopped, wash light on and door locked light flashing
When I load washing machine and set programme and start, the frost light flashes 5 times and cycle won't start. What could be the problem?
×