Machine has stopped, mid cycle, showing message "Error code C3, PNC 110007041
Can you help please?
Regards
Bob Holmes
Hello,
This error code (C3) means your water sensor has detected a leak. it will stop when the sensor is dry.
Try getting the water out of the trap door and letting the machine dry.
I would also unplug it for secirity reasons.
Basically your water pump is getting tired or the sensor is dirty. Try cleaning the sensor or else you may have to change the pump.
Good Luck!!
2,567 views
Usually answered in minutes!
The control knob on my lavalogic 1620 washing machine can't turn the machine off when press
×