Whatdoes error code EHO AEG drayaer - AEG Washing Machines

AEG Fault codes....

https://www.northlondonappliancerepairs.co.uk/error-codes/aeg-error-codes/error-codes-for-aeg-washing-machines.html

Tis quite a way down the list.

There is a problem with the power supply on the main board.

Some companies share generic codes like 'Lw', for low water level or 'DL' for Door Lock. This might help, there are other sites when Googling 'make model error codes'.

AEG Dishwasher Error Codes ' Dr. Dishwasher

www.drdishwasher.com > manufacturer > error-codes

Error/Fault Codes for AEG Dishwashers with an LED Display Fault Code ,10 Symptom: Dishwasher not filling with water. Go to: Why is My Dishwasher Not Filling ...

Power supply problem. Try another plug in. If it still doesnt work you have a wiring problem.

The EHO (or EH0) error indicates a problem with the incoming power or an electrical problem inside the washer. Unplug the washer for a while to reset the error code. Next check your wiring and make sure that the outlet doesn't have a fault. If you live in an area with brown-outs or wires that touched during a storm, wait until the electricity is repaired. Then check if the power supply to the washer was damaged by the surge or changing power levels.

If these aren't responsible for the problem, you'll need to check the wiring for shielding damage, the wire harnesses and the rest of the washer. There is a parts diagram here: http://docplayer.net/60693214-Spare-parts-list-household-washing-machines-pnc-elc-brand-model-market-electrolux-ewf10842-th-washing-machines-front-loaded.html .

I hope this helps.

Cindy Wells

The power supply is failing and needs to be replaced but first try the steps provided in the link below. Washing machine displays error message EHO EH0

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_a67ead41eb5fc62a

This causes a water leakage, which flows inside the bottom of appliance, thus switching on the Aqua Control sensor and generating alarm EF0/EF3.

Be sure to find water leaks and repair the defect.
Incline the washing machine of about 10 cm to spill the water, so that the sensor can operate normally again.

Dado

Family error code "E20" means difficulties in draining, but I never heard for error code E25 on this model. Could be : E21, E23 and E24 error code.

Dado

well their is no fiat code for this number
P0202 Injector 2 -Circuit Malfunction
this is generic code for this number

Hello,

That error code does not exist,the closest is EH1.which means that the supply to the machine is incorrect.What is the model,and PNC.number,hope this helps.

Regards.