I have a samsung front loader WF7700N6W1 WHICH KEEPS COMING UPWITH THE ERROR CODE 3E IVE checked the drainage plug and cleared that but mavhine still not working.

Troubleshooting the "E3" error code in Maytag MAH6700 ...

fixitnow.com/.../troubleshooting-the-e3-error-code-in-maytag-mah6700-...

Feb 20, 2011 - These codes in your (made-by-Samsung) Maytag washer might pop up during the ... In fact, the E3 error code means that the Machine Control wants to make the motor spin but won't do it because it's getting a weird reading from the tachometer.... MAH6700 and MAH8700 models (they use the same motor).

I have a samsung frontload washing machine. A code E3 is ...

www.shopyourway.com > Denise LaGrasse > Questions

Mar 15, 2014 - My samsung front loader is not working. do not no what E3 means. ...code F26 mean on a Kenmore Elite model 110.4708 washing machine?

How To Fix 3E Error Code On A Samsung Washing Machine

www.appliancerepairlesson.com/.../how-to-fix-3e-error-code-on-a-samsu...

May 15, 2015 - Samsung uses the 3E error code to indicate a drive motor tach fault. ...If you're handy, you can fix your Samsung front load washing machine error code ....My samsung frontload washer shows e3 and the drum does not turn ...

This video will help you diagnose the fault on Samsung Vrt steam 3e error codes and the video will help you solve the problem

Samsung front loader washing machine WF7700N6W1 won run YouTube

3E is an error code related to the motor speed or speed sensor. It could be a bad motor, or perhaps a foreign object impeding motor function. Depending on your expertise, you could tear down the motor assembly and check for problems, or else contact a repair technician. Given that it's happened twice, it will likely happen again.

Unplug for a few then plug back in. Sometimes his will reset the machine.

The "3E" error code indicates that a high current is detected.
A "3E" error in a Samsung washer indicates that there is an issue with the motor. Restarting the cycle may clear the error, but a service technician should be consulted if the error code appears again.

Means Drainage Error. You need to clear out the drain pump. Depends if its a top loader or front loader. If front then if you should be able to access the pump from the front bottom by unscrewing and removing the filter. If not then you will need to tilt the machine back as far as you can so you can access the underneath. You will see the small drain pump. Have a basin ready to catch any water that comes out when remove the pump which is only held in by 1 or 2 screws and twisted out or pulled out. If it is clear then try removing the pipe that goes from the pump to the base of the tub. Hope this helps

3E - MOTOR RESTRICTION ERROR
Hall Senior is sensed every 5OOms. 1 second after motor starts to work.

If data of hall sensor is less than 2 (2RPM), the Washing motor will stop at once.

During Washing and Rinsing when a motor restriction is sensed, the motor stops and then proceeds to the next water -flow action. If the motor stops working and this happens in one direction ten times, "3E" Error is displayed.

During dehydrating. when a motor restriction is sensed. the motor stops working and then returns to the initial stage of the dehydration unbalance sensing cycle. After ten times, "3E" Error is displayed, When the motor Is told to stop because of an operating function. no error is shown.

Power 81W OFF can clear the motor restriction error.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

3E - MOTOR RESTRICTION ERROR
Hall Senior is sensed every 5OOms. 1 second after motor starts to work.

If data of hall sensor is less than 2 (2RPM), the Washing motor will stop at once.

During Washing and Rinsing when a motor restriction is sensed, the motor stops and then proceeds to the next water -flow action. If the motor stops working and this happens in one direction ten times, "3E" Error is displayed.

During dehydrating. when a motor restriction is sensed. the motor stops working and then returns to the initial stage of the dehydration unbalance sensing cycle. After ten times, "3E" Error is displayed, When the motor Is told to stop because of an operating function. no error is shown.

Power 81W OFF can clear the motor restriction error.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question