Washing Machines Logo

Related Topics:

Eran Gafni Posted on Oct 23, 2016

I have AEG Lavamat 60210 Front Load Washer machine. The machine stops after some cycles and time on the screen return to start. The Problem I get is E52.

1 Answer

m_suresh

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

  • Contributor 22 Answers
  • Posted on Oct 23, 2016
m_suresh
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Nov 25, 2009
Answers
22
Questions
0
Helped
5139
Points
48

Intervention of motor overheating safety cut-out.
Possible fault Motor faulty; Intervention of motor overheating cutout; Wiring faulty; Electronic board faulty.
Machine Status/Action Power to the heater unit and reversal of the direction of rotation are interrupted. If the problem does not re-occur, the alarm is memorized and the cycle continues. If the fault persists after several attempts to supply power (about 35 min.), alarm E51 is generated.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why AEG Lavamat 88840 Front Load Washer doesn't spin?

either the pump is blocked so cant pump water out so stops program.or brushes in motor worn down(both cheap fixes)
0helpful
1answer

AEG Lavamat 64809 error code E30

Lavamat?! Where in the *&%^ is this machine from? Yugoslavia! I'm guessing it will not allow water IN Because only the Spin (Centrifuge) cycle works?! So if that is so you need your water inlet valves replaced, there are Two. Even in machines named after a Bar of Soap!

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_b77d19396bfe2249

0helpful
1answer

Washer wont complete cycle

Sound like the control board is bad
0helpful
2answers

AEG Lavamat W1450 Electronic - after about 10 mins of programme machine is making beeping sound and stopping

this is an errorcode !
try to download a servicemanual,
then you can figure out the exact failure -
like : does not heat up etc. ....
0helpful
1answer
3helpful
2answers

AEG 72640 stopping mid-cycle no error code showing

I have the same problem with my Oko Lavamat 74639 Update. I've tried changing the vacuum sensor, but no luck.
Did you get your fixed?
Olafur
0helpful
1answer

AEG lavamat 6955 sensorlogic, was showing F2,nowF3

Waited half hour; on start up F3 had cleared..pump overheat? Suspect sticky pump bearing..new pump.
0helpful
1answer

AEG Lavamat 74800 stops part way through the cycle - Error E50

I suggest trying this link. They will help you online.

https://www.justanswer.com/uk-appliance/23fl9-aeg-lavamat-74800-error-50-reported.html
0helpful
1answer

AEG Lavamat 16820: Strange noise coming the machine

Ok, the motor windings are bad. the A.C. hum is a warning that the motor will sound when the windings are separated or shorting. its unable to hold a balanced current.the motor will actually stop soon if it isn't repaired.
Not finding what you are looking for?

142 views

Ask a Question

Usually answered in minutes!

Top AEG Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you an AEG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...