Rockwell model number RG8170 need to know how to re-line and a manual for it

Carb needs high and low speed screws opened just 1/4 turn counterclockwise. If you've no special adjustment screwdriver, turn those screws into flat blade screwdriver screws with a dremel tool...grind a slot in them. Also heard of some users adjusting with hollow tube that can fit down over the screw, but i have never done it that way

You can read the manual on-line here: https://www.manualslib.com/manual/797990/Rockwell-Rk3440k.html
This is a pretty good site for this sort of thing. You'll need to create an account to download it. I don't know if it is free or not, but you can read on-line for free.

only a facebook vidieo

https://www.facebook.com/Nambucca-Valley-Whipper-Snipper-Chainsaw-Mower-Recycling-ServiceRepairs-803906806364452/videos?fref=photo

Richard, could not find your exact model, second link is Rockwell where you can contact them to get a safety manual.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
https://www.facebook.com/803906806364452/videos/821489884606144
Contact Us
http://media.supercheapauto.com.au/sca/files/fact-sheet/7fc52383-a91b-402f-a31f-27ffd7c45837.pdf

I can't locate that model number. Try this link:

http://www.dewaltservicenet.com/Products/ProductManual.aspx?q=band%20saw

Do you have a model number? There are several models.

If you know your model number you can use this page to find your manual:

http://www.hammerwall.com/Manuals/Rockwell/460/

Use the search pane at the top of the page if you dopn't see the manual on the list.

Thanks for using FixYa,

Kelly

Ok so you understand that Rockwell became Delta, or was it the other way round?? Either case the best source of manuals for these much loved machines is over at Old Wood Working Machines:
http://www.owwm.com/mfgindex/detail.aspx?id=698&tab=3
You should find your model.. 14" Delta doesn't really pin it down too exactly. The model number should be on the warning plate.

go to this site and call rockwell on the number provided.

http://rockwelltools.com/service_parts.htm

I don't know how old that machine is, and I can't get any hits on the model number you gave, but have a look at this link and the other Delta/Rockwell bandsaw manuals available at the same site, and you may find something that you can use. Go to machine info>publication reprints>and choose either Delta or Rockwell, then you can filter the results by bandsaw and see what's available out there. To download, just click on the blue letters PDF under the publication preview picture.


I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!