Sceptre X370BV-HD TV Logo

Related Topics:

A
Anonymous Posted on Jul 13, 2014

How to reset factory settings on a sceptre 32" x322bv-hd

Go into set up and reset to factory

1 Answer

Renee Williams

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Oct 02, 2019
Renee Williams
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Oct 02, 2019
Answers
1
Questions
0
Helped
12744
Points
1

This totally resolved my issuse!! Thanks for sharing!!

1 Related Answer

bbscruffybuc

Ocean Shores PC

  • 41 Answers
  • Posted on May 24, 2014

SOURCE: SCEPTRE X322BV, HDTV BLUE LED COMES ON WHEN POWERING UP, BUT NO PICTURE OR SOUND

I have the X322BV-HD and with no warning had the same thing happen. I"ve scoured the net and found very little--just as here on this site. I just got off the phone with a tech support rep at sceptor and got the following information:

HOW TO DO A FACTORY RESET:

  1. (Tech said this will often work even though you won't see anything on the screen--as long as the blue light is still on!) On the remote, press [MENU] and then 3 - 6 - 9 - 8 (If it's accepted, the TV will turn itself off.)
  2. Wait 10 seconds.
  3. Turn the TV back on and it will be back to all factory defaults.
That didn't work for me. But the second option, a Power Cycle Reset did.

POWER CYCLE RESET:
  1. Unplug the power cord and wait 10-15 minutes (extremely important, I used a timer set for 16 minutes just to be sure).
  2. While it is still unplugged, press and hold the [POWER] button for at LEAST 30 SECONDS - DO NOT RELEASE!
  3. While continuing to hold the [POWER] button, plug the TV back in.

The second option worked for me and it's back on working just fine. Hope this helps!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What is an open internal fuse and how do I check it out?

the fuse is blown -popped and internal means inside unit usually right after the power in wire connections
1helpful
1answer

How do I fix my LCD TV's ability to display picture?

it may be from inventor board that make light for screen.
0helpful
1answer

Dark screen more so in the center

Sounds like the LED's are not getting enough power. The power board must be going bad.
0helpful
1answer

I HOOK UP A RCA BLUE RAY I GET THE SOUNF AND PICTURE BUT IT'S NOT SHOWING IN COLOR

Check in menu to see if the region is set to Pal Europe instead of NTSC.this should restore colour.if it is already set to pal and giving black and white then switch it to NTSC
0helpful
1answer

X322bv powers on but does not show screen

It could be that your PC is having video issues booting. Find another monitor and see if it displays correctly. If it does, your original monitor is defective. If it doesn't, your PC boot has video issues (bad drivers, recently installed software causing conflicts with video card, etc.)
0helpful
1answer

How do I get hd channels to show on sceptre 32 inch classic hdtv?

Silly question, but are you subscribed to the HD channels? Most cable companies include HD channels o higher tier subscriptions, and then require a different decoder box to get them.
0helpful
1answer

Live chat friends

get online search the make and model u have and downld to thumb drive then insert in usb port.
0helpful
1answer

Who do i send the sceptre tv back too

Check with whoever you purchased it from first. If under warranty they may have some place in your area that will handle the repair etc.
1helpful
2answers

SCEPTRE X322BV, HDTV BLUE LED COMES ON WHEN POWERING UP, BUT NO PICTURE OR SOUND

I have the X322BV-HD and with no warning had the same thing happen. I"ve scoured the net and found very little--just as here on this site. I just got off the phone with a tech support rep at sceptor and got the following information:

HOW TO DO A FACTORY RESET:
  1. (Tech said this will often work even though you won't see anything on the screen--as long as the blue light is still on!) On the remote, press [MENU] and then 3 - 6 - 9 - 8 (If it's accepted, the TV will turn itself off.)
  2. Wait 10 seconds.
  3. Turn the TV back on and it will be back to all factory defaults.
That didn't work for me. But the second option, a Power Cycle Reset did.

POWER CYCLE RESET:
  1. Unplug the power cord and wait 10-15 minutes (extremely important, I used a timer set for 16 minutes just to be sure).
  2. While it is still unplugged, press and hold the [POWER] button for at LEAST 30 SECONDS - DO NOT RELEASE!
  3. While continuing to hold the [POWER] button, plug the TV back in.

The second option worked for me and it's back on working just fine. Hope this helps!
1helpful
1answer

My sceptre 32" class LCD 720p 60hz HDTV x322BV-HD!

if that is brand new and still covers on warranty you need to do is get back to the dealer for repair or possibly replace
Not finding what you are looking for?

12,754 views

Ask a Question

Usually answered in minutes!

Top Sceptre Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Are you a Sceptre Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...